diff options
Diffstat (limited to 'graphics/openscad-mcad/openscad-mcad.SlackBuild')
| -rw-r--r-- | graphics/openscad-mcad/openscad-mcad.SlackBuild | 106 |
1 files changed, 106 insertions, 0 deletions
diff --git a/graphics/openscad-mcad/openscad-mcad.SlackBuild b/graphics/openscad-mcad/openscad-mcad.SlackBuild new file mode 100644 index 0000000000..2834c0043d --- /dev/null +++ b/graphics/openscad-mcad/openscad-mcad.SlackBuild @@ -0,0 +1,106 @@ +#!/bin/sh + +# Slackware build script for openscad-mcad + +# Copyright 2020 Fernando Lopez Jr. <fernando.lopezjr@gmail.com> +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=openscad-mcad +COMVER=1ea402208c3127ffb443931e9bb1681c191dacca +VERSION=${VERSION:-2020.10.09.$( printf %s $COMVER | cut -c1-7 )} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} +ARCH=noarch + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf MCAD-$COMVER +tar xvf $CWD/$PRGNAM-$COMVER.tar.?z +cd MCAD-$COMVER + +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +mkdir -p $PKG/usr/share/openscad/libraries/MCAD/bitmap + +install -m775 2Dshapes.scad $PKG/usr/share/openscad/libraries/MCAD/bitmap +install -m775 3d_triangle.scad $PKG/usr/share/openscad/libraries/MCAD/bitmap +install -m775 array.scad $PKG/usr/share/openscad/libraries/MCAD/bitmap +install -m775 bearing.scad $PKG/usr/share/openscad/libraries/MCAD/bitmap +install -m775 bitmap/alphabet_block.scad $PKG/usr/share/openscad/libraries/MCAD/bitmap +install -m775 bitmap/bitmap.scad $PKG/usr/share/openscad/libraries/MCAD/bitmap +install -m775 bitmap/height_map.scad $PKG/usr/share/openscad/libraries/MCAD/bitmap +install -m775 bitmap/letter_necklace.scad $PKG/usr/share/openscad/libraries/MCAD/bitmap +install -m775 bitmap/name_tag.scad $PKG/usr/share/openscad/libraries/MCAD/bitmap +install -m775 bitmap/test_name_tag.scad $PKG/usr/share/openscad/libraries/MCAD/bitmap +install -m775 boxes.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 constants.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 curves.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 fonts.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 gears.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 gridbeam.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 hardware.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 involute_gears.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 layouts.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 lego_compatibility.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 libtriangles.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 linear_bearing.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 materials.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 math.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 metric_fastners.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 motors.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 multiply.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 nuts_and_bolts.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 polyholes.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 profiles.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 regular_shapes.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 screw.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 servos.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 shapes.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 stepper.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 teardrop.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 transformations.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 triangles.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 trochoids.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 units.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 unregular_shapes.scad $PKG/usr/share/openscad/libraries/MCAD/ +install -m775 utilities.scad $PKG/usr/share/openscad/libraries/MCAD/ + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a bitmap/README TODO README.markdown lgpl-2.1.txt $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} |