From 23b75a01ed0a4e4ae3d87f38e6bcdd1c48ddfce7 Mon Sep 17 00:00:00 2001 From: mario Date: Sun, 8 May 2011 13:03:25 -0500 Subject: network/cyrus-imapd: Updated for version 2.4.8. Signed-off-by: Robby Workman --- network/cyrus-imapd/README | 17 +- network/cyrus-imapd/README.SLACKWARE | 4 +- network/cyrus-imapd/cyrus-imapd.SlackBuild | 42 +- network/cyrus-imapd/cyrus-imapd.info | 8 +- ...s-imapd-2.4.4-autocreate-0.10-0-slackware.patch | 2165 ++++++++++++++++++++ .../cyrus-imapd-2.4.4-autosieve-0.6.0.patch | 182 ++ 6 files changed, 2391 insertions(+), 27 deletions(-) create mode 100644 network/cyrus-imapd/patches/cyrus-imapd-2.4.4-autocreate-0.10-0-slackware.patch create mode 100644 network/cyrus-imapd/patches/cyrus-imapd-2.4.4-autosieve-0.6.0.patch (limited to 'network/cyrus-imapd') diff --git a/network/cyrus-imapd/README b/network/cyrus-imapd/README index 718fbb8dd2..c276947781 100644 --- a/network/cyrus-imapd/README +++ b/network/cyrus-imapd/README @@ -1,5 +1,3 @@ -What is IMAP? - The Cyrus IMAP (Internet Message Access Protocol) server provides access to personal mail and system-wide bulletin boards through the IMAP protocol. The Cyrus IMAP server is a scalable enterprise mail system designed for use @@ -25,5 +23,16 @@ Cyrus technologies scale from independent use in email departments to a system centrally managed in a large enterprise. For more information on how to install and run cyrus-imapd, see -README.SLACKWARE that came with this package (which is also installed with the -docs). +README.SLACKWARE that came with this package (which is also installed +with the documentation). + +Two additional patches have been included, autocreate and autosieve, which +improve cyrus' capabilities. To learn more about them, check their accompanying +README files. To disable them, use: PATCHES=no ./cyrus-imapd.SlackBuild + +You must have a "cyrus" user and group to run this script. +Something like this will create them: + # groupadd -g 238 cyrus + # useradd -d /var/imap -s /bin/sh -u 238 -g 238 cyrus +See http://slackbuilds.org/uid_gid.txt for uid/gid suggestions. + diff --git a/network/cyrus-imapd/README.SLACKWARE b/network/cyrus-imapd/README.SLACKWARE index 6866435185..acdd29007e 100644 --- a/network/cyrus-imapd/README.SLACKWARE +++ b/network/cyrus-imapd/README.SLACKWARE @@ -8,10 +8,10 @@ a specific directory structure, you can do something like this: Afterwards run mkimap script to setup the enviroment: # su - cyrus -# /usr/doc/cyrus-imapd-2.3.16/tools/mkimap +# /usr/doc/cyrus-imapd-2.4.6/tools/mkimap You will probably also want to put this into rc.local: if [ -x /etc/rc.d/rc.cyrus-imapd ]; then - . /etc/rc.d/rc.cyrus-imapd start + /etc/rc.d/rc.cyrus-imapd start fi diff --git a/network/cyrus-imapd/cyrus-imapd.SlackBuild b/network/cyrus-imapd/cyrus-imapd.SlackBuild index 710e0f4ea4..d1ce170e1b 100644 --- a/network/cyrus-imapd/cyrus-imapd.SlackBuild +++ b/network/cyrus-imapd/cyrus-imapd.SlackBuild @@ -2,7 +2,7 @@ # Slackware build script for cyrus-imapd -# Copyright 2010, mario +# Copyright 2010-2011, mario # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,16 +23,16 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PRGNAM=cyrus-imapd -VERSION=${VERSION:-2.3.16} +VERSION=${VERSION:-2.4.8} BUILD=${BUILD:-1} TAG=${TAG:-_SBo} -# Automatically determine the architecture we're building on: +PATCHES=${PATCHES:-yes} + if [ -z "$ARCH" ]; then case "$( uname -m )" in i?86) ARCH=i486 ;; arm*) ARCH=arm ;; - # Unless $ARCH is already set, use uname -m for all other archs: *) ARCH=$( uname -m ) ;; esac fi @@ -56,14 +56,14 @@ else LIBDIRSUFFIX="" fi -# Bail if user isn't valid on your system -if ! grep -q ^cyrus: /etc/passwd ; then - echo " You must have a cyrus user to run this script." - echo " # groupadd -g 238 cyrus" - echo " # useradd -d /var/imap -s /bin/sh -u 238 -g 238 cyrus" - echo " Or something similar." +bailout() { + printf "\nYou must have a \"cyrus\" user and group to run this script.\n" + printf "Something like this will create them:\n" + printf "\t# groupadd -g 238 cyrus\n\t# useradd -d /var/imap -s /bin/sh -u 238 -g 238 cyrus\n\n" exit 1 -fi +} +getent group cyrus >/dev/null || bailout +getent passwd cyrus >/dev/null || bailout # Build with mysql database by default, sqlite/mysql/postgresql are supported DATABASE=${DATABASE:-mysql} @@ -89,6 +89,12 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; +if [ "$PATCHES" = yes ]; then +# Patches for autocreate/autosieve + patch -p1 <$CWD/patches/cyrus-imapd-2.4.4-autocreate-0.10-0-slackware.patch + patch -p1 <$CWD/patches/cyrus-imapd-2.4.4-autosieve-0.6.0.patch +fi + CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ @@ -105,8 +111,8 @@ CXXFLAGS="$SLKCFLAGS" \ --with-bdb-incdir=/usr/include/db4 \ --with-cyrus-user=cyrus \ --with-cyrus-group=cyrus \ - $DATABASE \ - --build=$ARCH-slackware-linux + --build=$ARCH-slackware-linux \ + $DATABASE make PERL_MM_OPT='INSTALLDIRS=vendor' make install DESTDIR=$PKG @@ -133,14 +139,16 @@ find $PKG -name perllocal.pod \ | xargs rm -f mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION -cp -a COPYRIGHT README README.andrew doc/ master/conf tools/ $PKG/usr/doc/$PRGNAM-$VERSION +cp -a COPYRIGHT README* doc/* master/conf tools/ $PKG/usr/doc/$PRGNAM-$VERSION cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE # Clean up the obsolete /usr/lib on 64bit systems. -if [ "$ARCH" = "x86_64" ]; then - rmdir $PKG/usr/lib -fi +[ "$ARCH" = "x86_64" ] && rmdir $PKG/usr/lib + +# Remove perllocal.pod and other special files; remove empty directories +find $PKG -name perllocal.pod -o -name ".packlist" -o -name "*.bs" | xargs rm -f || true +find $PKG -depth -type d -empty -delete || true mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/network/cyrus-imapd/cyrus-imapd.info b/network/cyrus-imapd/cyrus-imapd.info index 64fad2a40a..8de2f720ba 100644 --- a/network/cyrus-imapd/cyrus-imapd.info +++ b/network/cyrus-imapd/cyrus-imapd.info @@ -1,10 +1,10 @@ PRGNAM="cyrus-imapd" -VERSION="2.3.16" +VERSION="2.4.8" HOMEPAGE="http://www.cyrusimap.org/" -DOWNLOAD="ftp://ftp.cyrusimap.org/cyrus-imapd/cyrus-imapd-2.3.16.tar.gz" -MD5SUM="6a37feb1985974eee8a4a4b2932dd54c" +DOWNLOAD="ftp://ftp.cyrusimap.org/cyrus-imapd/cyrus-imapd-2.4.8.tar.gz" +MD5SUM="b55930293787a42d571a47f69aaacf28" DOWNLOAD_x86_64="" MD5SUM_x86_64="" MAINTAINER="mario" EMAIL="mario@slackverse.org" -APPROVED="michiel" +APPROVED="rworkman" diff --git a/network/cyrus-imapd/patches/cyrus-imapd-2.4.4-autocreate-0.10-0-slackware.patch b/network/cyrus-imapd/patches/cyrus-imapd-2.4.4-autocreate-0.10-0-slackware.patch new file mode 100644 index 0000000000..263af064c7 --- /dev/null +++ b/network/cyrus-imapd/patches/cyrus-imapd-2.4.4-autocreate-0.10-0-slackware.patch @@ -0,0 +1,2165 @@ +# Changed #include to #include +# Updated by mario@slackverse.org, 2011 +diff -Naur cyrus-imapd-2.4.4.orig/README.autocreate cyrus-imapd-2.4.4/README.autocreate +--- cyrus-imapd-2.4.4.orig/README.autocreate 1970-01-01 01:00:00.000000000 +0100 ++++ cyrus-imapd-2.4.4/README.autocreate 2010-11-16 08:48:37.704981331 +0100 +@@ -0,0 +1,213 @@ ++Cyrus IMAP autocreate Inbox patch ++---------------------------------- ++ ++NOTE : This patch has been created at the University of Athens. For more info, as well ++as more patches on Cyrus IMAPD server, please visit http://email.uoa.gr/ ++ ++NOTE : Patch updated for Cyrus IMAP 2.4.x by Martin Matuska ++ ++The design of Cyrus IMAP server does not predict the automatic creation of users' ++INBOX folders. The creation of a user's INBOX is considered to be an external task, ++that has to be completed as part of the user email account creation procedure. ++Hence, to create a new email account the site administrator has to: ++ ++ a) Include the new account in the user database for the authentication procedure ++ (e.g. sasldb, shadow, mysql, ldap). ++ b) Create the corresponding INBOX folder. ++ ++Alternatively, the user, if succesfully authenticated, may create his own INBOX folder, ++as long as the configuration of the site allows it (see "autocreatequota" in imapd.conf). ++Unlike what not careful readers may think, enabling the "autocreatequota" option, doesn't ++lead to the automatic INBOX folder creation by Cyrus IMAP server. ++In fact, "autocreate" means that the IMAP clients are allowed to automatically create ++the user INBOX. ++ ++This patch adds the functionality of automatic creation of the users' INBOX folders into ++the Cyrus IMAP server. It is implemented as two features, namely the "create on login" ++and "create on post". ++ ++ ++ ++Create on login ++=============== ++This feauture provides automatic creation of a user's INBOX folder when all of the ++following requirements are met: ++ ++i) The user has succesfully passed the authentication procedure. ++ ++ii) The user's authorisation ID (typically the same as the user's ++authentication ID) doesn't belong to the imap_admins or admins ++accounts (see imapd.conf). ++ ++iii) The "autocreatequota" option in the imap configuration file ++has been set to a non zero value. ++ ++iv) The corresponding to the user's authorisation ID INBOX folder ++does not exist. ++ ++The user's first login is the most typical case when all four requirements are met. ++Note that if the authenticated ID is allowed to proxy to another account for which ++all of the above requirements are met, the corresponding INBOX folder for that account ++will be created. ++ ++ ++ ++Create on post ++============== ++This feauture provides automatic creation of a user's INBOX folder when all of the ++following requirements are met. ++ ++i) An email message addressed to the user has been received. ++ ++ii) The recipient is not any of the imap_admins or admins accounts. ++Note that passing emails to admins or imap_admins accounts from ++the MTA to LMTP should be avoided in any case. ++ ++iii) The recipient's INBOX does not exist. ++ ++iv) The "autocreatequota" option in the imap configuration file ++has been set to a non zero value. ++ ++v) The "createonpost" option in the imap configuration file ++has been switched on. ++ ++ ++Besides the automatic creation of INBOX folder, additional functionalities are ++provided: ++ ++ (A) Automatic creation of INBOX subfolders controlled by "autocreateinboxfolders" ++configuration option. eg ++ ++autocreateinboxfolders: sent|drafts|spam|templates ++ ++ (B) Automatic subscription of INBOX subfolders controlled by "autosubscribeinboxfolders" ++configuration option. eg ++ ++autosubscribeinboxfolders: sent|spam ++ ++Obviously, only subscription to subfolders included in the "autocreateinboxfolder" ++list is meaningful. ++ ++ (C) Automatic subscription to shared folders (bulletin boards). The user gets ++automatically subscribed to the shared folders declared in the "autosubscribesharedfolders" ++configuration option in imapd.conf. ++eg autosubscribesharedfolders: public_folder | public_folder.subfolder ++ ++In order the above action to succeed, the shared folder has to pre-exist the INBOX creation ++and the user must have the appropriate permissions in order to be able to subscribe to the ++shared folder. ++ ++* A new config option has been added. 'autosubscribe_all_sharedfolders' is a yes/no ++option. When set to yes, the user is automatically subscribed to all shared folders one ++has permission to subscribe to. Please, note that when this option is set to yes, then ++'autosubscribesharedfolders' option is overriden. ++ ++ (D) Automatic creation of a predefined default sieve script. ++ ++This is very useful when a default sieve script is used for every user. Usually, a ++default anti-spam script may me be written in a file and copied to each user ++sieve scripts upon the INBOX creation. The imapd.conf options that have been added ++are 'autocreate_sieve_script', 'autocreate_sieve_compiledscript' and ++'generate_compiled_sieve_script'. ++ ++autocreate_sieve_script configuration option refers to the full path of the file ++that contains the sieve script. The default value is null and if no file is defined, ++then no default script is created upon INBOX creation. (The feature is disabled) ++eg autocreate_sieve_script: /etc/default_sieve_script ++ ++autocreate_sieve_compiledscript configuration option refers to the full path of the ++file that contains the bytecode compiled sieve script. If this filename is defined ++in imapd.conf and the file exists, then it is automatically copied in the user's sieve ++directory. If it is not defined, then a bytecode sieve script gets on the fly compiled ++by the daemon. ++eg autocreate_sieve_compiledscript: /etc/default_sieve_script.bc ++ ++generate_compiled_sieve_script is a boolean option that triggers the compilation of the ++source sieve script to bytecode sieve script. The file that the bytecode script will ++be saved is pointed by autocreate_sieve_compiledscript. ++ ++Ways of compiling a sieve script : ++1. Compile a sieve script using the standard sievec utility, distributed by CMU ++2. Compile a sieve script using the compile_sieve utility, released by UoA. This ++ tool is almost identical to the sievec utility, with the difference that it ++ reads the input and output file from autocreate_sieve_script and ++ autocreate_sieve_compiledscript options in imapd.conf ++3. Let cyrus create a compiled sieve script using a source script. Cyrus can be ++ instructed to save the compiled script any time a compiled script does not exist. ++ ++NOTES : ++1. In order this functionality to work, the following requirements must have been met: ++ - 'sieveusehomedir' option must be 'no' in the configuration (default). ++ - 'sievedir' option must have a valid value. ++2. Currently, this patch checks the validity of the source script while generating a ++ bytecode compiled script, but not the validity of the bytecode sieve script file. ++ The administrator should make sure that the provided files contain a valid sieve ++ script as well as the compiled script is updated every time the source script changes. ++ ++ ++ (E) The administrator may control for which users and/or groups may the INBOXes ++automatically be created. The autocreate_users option restricts the groups ++for which the patch will create the mailboxes. ++ ++The default value of autocreate_users is anyone. So, if not set at all, the patch will ++work for all users. However, one may set: ++ ++autocreate_users: user1 user2 group:group1 group:group2 ++ ++In that case, the INBOX will be created only for user1, user2 and the users that belong ++to group1 and group2. ++ ++More refined control per service is provided by the options imap_autocreate_users, ++pop3_autocreate_users and lmtp_autocreate_users. These options override the ++autocreate_users option and offer per service control. ++ ++Example: ++One may want to restrict the create on post functionality only for a specific group ++of users. To achieve this, the following lines must be added in the imapd.conf file: ++ ++createonpost: yes ++lmtp_autocreate_users: group:groupname ++ ++ ++ ++Issues to be considered ++======================= ++ ++I) In order to use the create on post feauture one should be absolutely sure that: ++a) The MTA checks the validity of the email recipient before sending the email to ++LMTP. This is an RFC821 requirement. This usually expands to "the mta should be ++able to use the account database as user mailbox database". ++b) Only authorised accounts/services can talk to LMTP. ++ ++II) Especially in the case of imap logins, the current patch implementation checks ++for the INBOX folder existence upon login, causing an extra mailbox lookup in most ++of the cases. ++A better approach would be to chase the "IMAP_MAILBOX_NONEXISTENT" error code and ++check if the error is associated with an INBOX folder. However, this would mess up ++Cyrus code. The way it was implemented may not have been the most performance ++optimised, but it produces a much cleaner and simple patch. ++ ++ ++ ++Virtual Domains Support ++======================= ++ ++Virtual domains are supported by all versions of the patch for cyrus-imapd-2.2.1-BETA and ++later. However, it is not possible to declare different INBOX subfolders to be created or ++shared folders to be subscribed to for every domain. ++ ++ ++ ++Things to be done ++================= ++ ++1. Support MUPDATE ++ ++It is within the developers' intentions to support the mupdate protocol, but serious ++design issues on future cyrus releases have to resolved first. ++ ++2. Select different attributes (quota, partition, sieve filter, etc) depending on the group ++a user belongs to. ++ ++For more information and updates please visit http://email.uoa.gr/projects/cyrus/autocreate ++ +diff -Naur cyrus-imapd-2.4.4.orig/imap/Makefile.in cyrus-imapd-2.4.4/imap/Makefile.in +--- cyrus-imapd-2.4.4.orig/imap/Makefile.in 2010-11-16 08:48:20.817612092 +0100 ++++ cyrus-imapd-2.4.4/imap/Makefile.in 2010-11-16 08:49:21.892354019 +0100 +@@ -66,7 +66,7 @@ + IMAP_COM_ERR_LIBS = @IMAP_COM_ERR_LIBS@ + LIB_WRAP = @LIB_WRAP@ + LIBS = $(IMAP_LIBS) $(IMAP_COM_ERR_LIBS) +-DEPLIBS = ../lib/libcyrus.a ../lib/libcyrus_min.a @DEPLIBS@ ++DEPLIBS = $(SIEVE_LIBS) ../lib/libcyrus.a ../lib/libcyrus_min.a @DEPLIBS@ + + CFLAGS = @CFLAGS@ + LDFLAGS = @LDFLAGS@ @COM_ERR_LDFLAGS@ +@@ -102,7 +102,7 @@ + imapparse.o telemetry.o user.o notify.o idle.o quota_db.o \ + sync_log.o $(SEEN) mboxkey.o backend.o tls.o message_guid.o \ + statuscache_db.o userdeny_db.o sequence.o upgrade_index.o \ +- dlist.o version.o ++ dlist.o version.o autosieve.o + + IMAPDOBJS=pushstats.o imapd.o proxy.o imap_proxy.o index.o + +@@ -118,7 +118,7 @@ + fud smmapd reconstruct quota mbpath ipurge cyr_dbtool cyr_synclog \ + cyrdump chk_cyrus cvt_cyrusdb deliver ctl_mboxlist \ + ctl_deliver ctl_cyrusdb squatter mbexamine cyr_expire arbitron \ +- unexpunge cyr_df cyr_sequence cyr_userseen @IMAP_PROGS@ ++ unexpunge compile_sieve cyr_df cyr_sequence cyr_userseen @IMAP_PROGS@ + + BUILTSOURCES = imap_err.c imap_err.h pushstats.c pushstats.h \ + lmtpstats.c lmtpstats.h mupdate_err.c mupdate_err.h \ +@@ -180,9 +180,9 @@ + mupdate_err.h: mupdate_err.c + + ### Services +-idled: idled.o mutex_fake.o libimap.a $(DEPLIBS) ++idled: idled.o mutex_fake.o libimap.a $(SIEVE_LIBS) $(DEPLIBS) + $(CC) $(LDFLAGS) -o idled \ +- idled.o mutex_fake.o libimap.a $(DEPLIBS) $(LIBS) ++ idled.o mutex_fake.o libimap.a $(SIEVE_LIBS) $(DEPLIBS) $(LIBS) + + lmtpd: lmtpd.o proxy.o $(LMTPOBJS) $(SIEVE_OBJS) mutex_fake.o \ + libimap.a $(SIEVE_LIBS) $(DEPLIBS) $(SERVICE) +@@ -365,6 +365,10 @@ + sync_reset sync_reset.o sync_support.o \ + libimap.a mutex_fake.o $(DEPLIBS) $(LIBS) + ++compile_sieve: compile_sieve.o libimap.a $(DEPLIBS) $(SIEVE_LIBS) ++ $(CC) $(LDFLAGS) -o compile_sieve compile_sieve.o $(CLIOBJS) \ ++ libimap.a $(SIEVE_LIBS) $(DEPLIBS) $(LIBS) ++ + ### Other Misc Targets + + clean: +diff -Naur cyrus-imapd-2.4.4.orig/imap/autosieve.c cyrus-imapd-2.4.4/imap/autosieve.c +--- cyrus-imapd-2.4.4.orig/imap/autosieve.c 1970-01-01 01:00:00.000000000 +0100 ++++ cyrus-imapd-2.4.4/imap/autosieve.c 2010-11-16 08:48:37.722056581 +0100 +@@ -0,0 +1,590 @@ ++#include ++#include ++#include ++ ++#ifdef HAVE_UNISTD_H ++#include ++#endif ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "global.h" ++#include "util.h" ++#include "xmalloc.h" ++#include "xstrlcpy.h" ++#include "xstrlcat.h" ++#include "mailbox.h" ++#include "imap_err.h" ++#include "sieve_interface.h" ++#include "script.h" ++ ++#define TIMSIEVE_FAIL -1 ++#define TIMSIEVE_OK 0 ++#define MAX_FILENAME 1024 ++ ++static int get_script_name(char *sievename, size_t buflen, const char *filename); ++static int get_script_dir(char *sieve_script_dir, size_t buflen, char *userid, const char *sieve_dir); ++int autoadd_sieve(char *userid, const char *source_script); ++ ++//static void fatal(const char *s, int code); ++static void foo(void); ++static int sieve_notify(void *ac __attribute__((unused)), ++ void *interp_context __attribute__((unused)), ++ void *script_context __attribute__((unused)), ++ void *message_context __attribute__((unused)), ++ const char **errmsg __attribute__((unused))); ++static int mysieve_error(int lineno, const char *msg, ++ void *i __attribute__((unused)), void *s); ++static int is_script_parsable(FILE *stream, char **errstr, sieve_script_t **ret); ++ ++ ++sieve_vacation_t vacation2 = { ++ 0, /* min response */ ++ 0, /* max response */ ++ (sieve_callback *) &foo, /* autorespond() */ ++ (sieve_callback *) &foo /* send_response() */ ++}; ++ ++ ++/* ++ * Find the name of the sieve script ++ * given the source script and compiled script names ++ */ ++static int get_script_name(char *sievename, size_t buflen, const char *filename) ++{ ++ char *p; ++ int r; ++ ++ p = strrchr(filename, '/'); ++ if (p == NULL) ++ p = (char *) filename; ++ else ++ p++; ++ ++ r = strlcpy(sievename, p, buflen) - buflen; ++ return (r >= 0 || r == -buflen ? 1 : 0); ++} ++ ++ ++/* ++ * Find the directory where the sieve scripts of the user ++ * reside ++ */ ++static int get_script_dir(char *sieve_script_dir, size_t buflen, char *userid, const char *sieve_dir) ++{ ++ char *user = NULL, *domain = NULL; ++ ++ /* Setup the user and the domain */ ++ if(config_virtdomains && (domain = strchr(userid, '@'))) { ++ user = (char *) xmalloc((domain - userid +1) * sizeof(char)); ++ strlcpy(user, userid, domain - userid + 1); ++ domain++; ++ } else ++ user = userid; ++ ++ /* Find the dir path where the sieve scripts of the user will reside */ ++ if (config_virtdomains && domain) { ++ if(snprintf(sieve_script_dir, buflen, "%s%s%c/%s/%c/%s/", ++ sieve_dir, FNAME_DOMAINDIR, dir_hash_c(domain, config_fulldirhash), domain, dir_hash_c(user,config_fulldirhash), user) >= buflen) { ++ free(user); ++ return 1; ++ } ++ } else { ++ if(snprintf(sieve_script_dir, buflen, "%s/%c/%s/", ++ sieve_dir, dir_hash_c(user,config_fulldirhash), user) >= buflen) ++ return 1; ++ } ++ ++ /* Free the xmalloced user memory, reserved above */ ++ if(user != userid) ++ free(user); ++ ++ return 0; ++} ++ ++int autoadd_sieve(char *userid, const char *source_script) ++{ ++ sieve_script_t *s = NULL; ++ bytecode_info_t *bc = NULL; ++ char *err = NULL; ++ FILE *in_stream, *out_fp; ++ int out_fd, in_fd, r, k; ++ int do_compile = 0; ++ const char *sieve_dir = NULL; ++ const char *compiled_source_script = NULL; ++ char sievename[MAX_FILENAME]; ++ char sieve_script_name[MAX_FILENAME]; ++ char sieve_script_dir[MAX_FILENAME]; ++ char sieve_bcscript_name[MAX_FILENAME]; ++ char sieve_default[MAX_FILENAME]; ++ char sieve_tmpname[MAX_FILENAME]; ++ char sieve_bctmpname[MAX_FILENAME]; ++ char sieve_bclink_name[MAX_FILENAME]; ++ char buf[4096]; ++ mode_t oldmask; ++ struct stat statbuf; ++ ++ /* We don't support using the homedirectory, like timsieved */ ++ if (config_getswitch(IMAPOPT_SIEVEUSEHOMEDIR)) { ++ syslog(LOG_WARNING,"autocreate_sieve: autocreate_sieve does not work with sieveusehomedir option in imapd.conf"); ++ return 1; ++ } ++ ++ /* Check if sievedir is defined in imapd.conf */ ++ if(!(sieve_dir = config_getstring(IMAPOPT_SIEVEDIR))) { ++ syslog(LOG_WARNING, "autocreate_sieve: sievedir option is not defined. Check imapd.conf"); ++ return 1; ++ } ++ ++ /* Check if autocreate_sieve_compiledscript is defined in imapd.conf */ ++ if(!(compiled_source_script = config_getstring(IMAPOPT_AUTOCREATE_SIEVE_COMPILEDSCRIPT))) { ++ syslog(LOG_WARNING, "autocreate_sieve: autocreate_sieve_compiledscript option is not defined. Compiling it"); ++ do_compile = 1; ++ } ++ ++ if(get_script_dir(sieve_script_dir, sizeof(sieve_script_dir), userid, sieve_dir)) { ++ syslog(LOG_WARNING, "autocreate_sieve: Cannot find sieve scripts directory"); ++ return 1; ++ } ++ ++ if (get_script_name(sievename, sizeof(sievename), source_script)) { ++ syslog(LOG_WARNING, "autocreate_sieve: Invalid sieve script %s", source_script); ++ return 1; ++ } ++ ++ if(snprintf(sieve_tmpname, sizeof(sieve_tmpname), "%s%s.script.NEW",sieve_script_dir, sievename) >= sizeof(sieve_tmpname)) { ++ syslog(LOG_WARNING, "autocreate_sieve: Invalid sieve path %s, %s, %s", sieve_dir, sievename, userid); ++ return 1; ++ } ++ if(snprintf(sieve_bctmpname, sizeof(sieve_bctmpname), "%s%s.bc.NEW",sieve_script_dir, sievename) >= sizeof(sieve_bctmpname)) { ++ syslog(LOG_WARNING, "autocreate_sieve: Invalid sieve path %s, %s, %s", sieve_dir, sievename, userid); ++ return 1; ++ } ++ if(snprintf(sieve_script_name, sizeof(sieve_script_name), "%s%s.script",sieve_script_dir, sievename) >= sizeof(sieve_script_name)) { ++ syslog(LOG_WARNING, "autocreate_sieve: Invalid sieve path %s, %s, %s", sieve_dir, sievename, userid); ++ return 1; ++ } ++ if(snprintf(sieve_bcscript_name, sizeof(sieve_bcscript_name), "%s%s.bc",sieve_script_dir, sievename) >= sizeof(sieve_bcscript_name)) { ++ syslog(LOG_WARNING, "autocreate_sieve: Invalid sieve path %s, %s, %s", sieve_dir, sievename, userid); ++ return 1; ++ } ++ if(snprintf(sieve_default, sizeof(sieve_default), "%s%s",sieve_script_dir,"defaultbc") >= sizeof(sieve_default)) { ++ syslog(LOG_WARNING, "autocreate_sieve: Invalid sieve path %s, %s, %s", sieve_dir, sievename, userid); ++ return 1; ++ } ++ if(snprintf(sieve_bclink_name, sizeof(sieve_bclink_name), "%s.bc", sievename) >= sizeof(sieve_bclink_name)) { ++ syslog(LOG_WARNING, "autocreate_sieve: Invalid sieve path %s, %s, %s", sieve_dir, sievename, userid); ++ return 1; ++ } ++ ++ /* Check if a default sieve filter alrady exists */ ++ if(!stat(sieve_default,&statbuf)) { ++ syslog(LOG_WARNING,"autocreate_sieve: Default sieve script already exists"); ++ fclose(in_stream); ++ return 1; ++ } ++ ++ /* Open the source script. if there is a problem with that exit */ ++ in_stream = fopen(source_script, "r"); ++ if(!in_stream) { ++ syslog(LOG_WARNING,"autocreate_sieve: Unable to open sieve script %s. Check permissions",source_script); ++ return 1; ++ } ++ ++ ++ /* ++ * At this point we start the modifications of the filesystem ++ */ ++ ++ /* Create the directory where the sieve scripts will reside */ ++ r = cyrus_mkdir(sieve_script_dir, 0755); ++ if(r == -1) { ++ /* If this fails we just leave */ ++ syslog(LOG_WARNING,"autocreate_sieve: Unable to create directory %s. Check permissions",sieve_script_name); ++ return 1; ++ } ++ ++ /* ++ * We open the file that will be used as the bc file. If this file exists, overwrite it ++ * since something bad has happened. We open the file here so that this error checking is ++ * done before we try to open the rest of the files to start copying etc. ++ */ ++ out_fd = open(sieve_bctmpname, O_CREAT|O_TRUNC|O_WRONLY, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH); ++ if(out_fd < 0) { ++ if(errno == EEXIST) { ++ syslog(LOG_WARNING,"autocreate_sieve: File %s already exists. Probaly left over. Ignoring",sieve_bctmpname); ++ } else if (errno == EACCES) { ++ syslog(LOG_WARNING,"autocreate_sieve: No access to create file %s. Check permissions",sieve_bctmpname); ++ fclose(in_stream); ++ return 1; ++ } else { ++ syslog(LOG_WARNING,"autocreate_sieve: Unable to create %s. Unknown error",sieve_bctmpname); ++ fclose(in_stream); ++ return 1; ++ } ++ } ++ ++ if(!do_compile && compiled_source_script && (in_fd = open(compiled_source_script, O_RDONLY)) != -1) { ++ while((r = read(in_fd, buf, sizeof(buf))) > 0) { ++ if((k=write(out_fd, buf,r)) < 0) { ++ syslog(LOG_WARNING, "autocreate_sieve: Error writing to file: %s, error: %d", sieve_bctmpname, errno); ++ close(out_fd); ++ close(in_fd); ++ fclose(in_stream); ++ unlink(sieve_bctmpname); ++ return 1; ++ } ++ } ++ ++ if(r == 0) { /* EOF */ ++ close(out_fd); ++ close(in_fd); ++ } else if (r < 0) { ++ syslog(LOG_WARNING, "autocreate_sieve: Error reading compiled script file: %s. Will try to compile it", ++ compiled_source_script); ++ close(in_fd); ++ do_compile = 1; ++ if(lseek(out_fd, 0, SEEK_SET)) { ++ syslog(LOG_WARNING, "autocreate_sieve: Major IO problem. Aborting"); ++ return 1; ++ } ++ } ++ close(in_fd); ++ } else { ++ if(compiled_source_script) ++ syslog(LOG_WARNING,"autocreate_sieve: Problem opening compiled script file: %s. Compiling it", compiled_source_script); ++ do_compile = 1; ++ } ++ ++ ++ /* Because we failed to open a precompiled bc sieve script, we compile one */ ++ if(do_compile) { ++ if(is_script_parsable(in_stream,&err, &s) == TIMSIEVE_FAIL) { ++ if(err && *err) { ++ syslog(LOG_WARNING,"autocreate_sieve: Error while parsing script %s.",err); ++ free(err); ++ } else ++ syslog(LOG_WARNING,"autocreate_sieve: Error while parsing script"); ++ ++ unlink(sieve_bctmpname); ++ fclose(in_stream); ++ close(out_fd); ++ return 1; ++ } ++ ++ /* generate the bytecode */ ++ if(sieve_generate_bytecode(&bc, s) == TIMSIEVE_FAIL) { ++ syslog(LOG_WARNING,"autocreate_sieve: problem compiling sieve script"); ++ /* removing the copied script and cleaning up memory */ ++ unlink(sieve_bctmpname); ++ sieve_script_free(&s); ++ fclose(in_stream); ++ close(out_fd); ++ return 1; ++ } ++ ++ if(sieve_emit_bytecode(out_fd, bc) == TIMSIEVE_FAIL) { ++ syslog(LOG_WARNING,"autocreate_sieve: problem emiting sieve script"); ++ /* removing the copied script and cleaning up memory */ ++ unlink(sieve_bctmpname); ++ sieve_free_bytecode(&bc); ++ sieve_script_free(&s); ++ fclose(in_stream); ++ close(out_fd); ++ return 1; ++ } ++ ++ /* clean up the memory */ ++ sieve_free_bytecode(&bc); ++ sieve_script_free(&s); ++ } ++ ++ close(out_fd); ++ rewind(in_stream); ++ ++ /* Copy the initial script */ ++ oldmask = umask(077); ++ if((out_fp = fopen(sieve_tmpname, "w")) == NULL) { ++ syslog(LOG_WARNING,"autocreate_sieve: Unable to open %s destination sieve script", sieve_tmpname); ++ unlink(sieve_bctmpname); ++ umask(oldmask); ++ fclose(in_stream); ++ return 1; ++ } ++ umask(oldmask); ++ ++ while((r = fread(buf,sizeof(char), sizeof(buf), in_stream))) { ++ if( fwrite(buf,sizeof(char), r, out_fp) != r) { ++ syslog(LOG_WARNING,"autocreate_sieve: Problem writing to sieve script file: %s",sieve_tmpname); ++ fclose(out_fp); ++ unlink(sieve_tmpname); ++ unlink(sieve_bctmpname); ++ fclose(in_stream); ++ return 1; ++ } ++ } ++ ++ if(feof(in_stream)) { ++ fclose(out_fp); ++ } else { /* ferror */ ++ fclose(out_fp); ++ unlink(sieve_tmpname); ++ unlink(sieve_bctmpname); ++ fclose(in_stream); ++ return 1; ++ } ++ ++ /* Renaming the necessary stuff */ ++ if(rename(sieve_tmpname, sieve_script_name)) { ++ unlink(sieve_tmpname); ++ unlink(sieve_bctmpname); ++ return 1; ++ } ++ ++ if(rename(sieve_bctmpname, sieve_bcscript_name)) { ++ unlink(sieve_bctmpname); ++ unlink(sieve_bcscript_name); ++ return 1; ++ } ++ ++ /* end now with the symlink */ ++ if(symlink(sieve_bclink_name, sieve_default)) { ++ if(errno != EEXIST) { ++ syslog(LOG_WARNING, "autocreate_sieve: problem making the default link."); ++ /* Lets delete the files */ ++ unlink(sieve_script_name); ++ unlink(sieve_bcscript_name); ++ } ++ } ++ ++ /* ++ * If everything has succeeded AND we have compiled the script AND we have requested ++ * to generate the global script so that it is not compiled each time then we create it. ++ */ ++ if(do_compile && ++ config_getswitch(IMAPOPT_GENERATE_COMPILED_SIEVE_SCRIPT)) { ++ ++ if(!compiled_source_script) { ++ syslog(LOG_WARNING, "autocreate_sieve: To save a compiled sieve script, autocreate_sieve_compiledscript must have been defined in imapd.conf"); ++ return 0; ++ } ++ ++ if(snprintf(sieve_tmpname, sizeof(sieve_tmpname), "%s.NEW", compiled_source_script) >= sizeof(sieve_tmpname)) ++ return 0; ++ ++ /* ++ * Copy everything from the newly created bc sieve sieve script. ++ */ ++ if((in_fd = open(sieve_bcscript_name, O_RDONLY))<0) { ++ return 0; ++ } ++ ++ if((out_fd = open(sieve_tmpname, O_CREAT|O_EXCL|O_WRONLY, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH)) < 0) { ++ if(errno == EEXIST) { ++ /* Someone is already doing this so just bail out. */ ++ syslog(LOG_WARNING, "autocreate_sieve: %s already exists. Some other instance processing it, or it is left over", sieve_tmpname); ++ close(in_fd); ++ return 0; ++ } else if (errno == EACCES) { ++ syslog(LOG_WARNING,"autocreate_sieve: No access to create file %s. Check permissions",sieve_tmpname); ++ close(in_fd); ++ return 0; ++ } else { ++ syslog(LOG_WARNING,"autocreate_sieve: Unable to create %s",sieve_tmpname); ++ close(in_fd); ++ return 0; ++ } ++ } ++ ++ while((r = read(in_fd, buf, sizeof(buf))) > 0) { ++ if((k = write(out_fd,buf,r)) < 0) { ++ syslog(LOG_WARNING, "autocreate_sieve: Error writing to file: %s, error: %d", sieve_tmpname, errno); ++ close(out_fd); ++ close(in_fd); ++ unlink(sieve_tmpname); ++ return 0; ++ } ++ } ++ ++ if(r == 0 ) { /*EOF */ ++ close(out_fd); ++ close(in_fd); ++ } else if (r < 0) { ++ syslog(LOG_WARNING, "autocreate_sieve: Error writing to file: %s, error: %d", sieve_tmpname, errno); ++ close(out_fd); ++ close(in_fd); ++ unlink(sieve_tmpname); ++ return 0; ++ } ++ ++ /* Rename the temporary created sieve script to its final name. */ ++ if(rename(sieve_tmpname, compiled_source_script)) { ++ if(errno != EEXIST) { ++ unlink(sieve_tmpname); ++ unlink(compiled_source_script); ++ } ++ return 0; ++ } ++ ++ syslog(LOG_NOTICE, "autocreate_sieve: Compiled sieve script was successfully saved in %s", compiled_source_script); ++ } ++ ++ return 0; ++} ++ ++/*static void fatal(const char *s, int code) ++{ ++ printf("Fatal error: %s (%d)\r\n", s, code); ++ exit(1); ++}*/ ++ ++/* to make larry's stupid functions happy :) */ ++static void foo(void) ++{ ++ fatal("stub function called", 0); ++} ++ ++static int sieve_notify(void *ac __attribute__((unused)), ++ void *interp_context __attribute__((unused)), ++ void *script_context __attribute__((unused)), ++ void *message_context __attribute__((unused)), ++ const char **errmsg __attribute__((unused))) ++{ ++ fatal("stub function called", 0); ++ return SIEVE_FAIL; ++} ++ ++static int mysieve_error(int lineno, const char *msg, ++ void *i __attribute__((unused)), void *s) ++{ ++ char buf[1024]; ++ char **errstr = (char **) s; ++ ++ snprintf(buf, 80, "line %d: %s\r\n", lineno, msg); ++ *errstr = (char *) xrealloc(*errstr, strlen(*errstr) + strlen(buf) + 30); ++ syslog(LOG_DEBUG, "%s", buf); ++ strcat(*errstr, buf); ++ ++ return SIEVE_OK; ++} ++ ++/* end the boilerplate */ ++ ++/* returns TRUE or FALSE */ ++int is_script_parsable(FILE *stream, char **errstr, sieve_script_t **ret) ++{ ++ sieve_interp_t *i; ++ sieve_script_t *s; ++ int res; ++ ++ res = sieve_interp_alloc(&i, NULL); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_interp_alloc() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_redirect(i, (sieve_callback *) &foo); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_register_redirect() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ res = sieve_register_discard(i, (sieve_callback *) &foo); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_register_discard() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ res = sieve_register_reject(i, (sieve_callback *) &foo); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_register_reject() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ res = sieve_register_fileinto(i, (sieve_callback *) &foo); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_register_fileinto() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ res = sieve_register_keep(i, (sieve_callback *) &foo); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_register_keep() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_imapflags(i, NULL); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_register_imapflags() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_size(i, (sieve_get_size *) &foo); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_register_size() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_header(i, (sieve_get_header *) &foo); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_register_header() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_envelope(i, (sieve_get_envelope *) &foo); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_register_envelope() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_vacation(i, &vacation2); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_register_vacation() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_notify(i, &sieve_notify); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_register_notify() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_parse_error(i, &mysieve_error); ++ if (res != SIEVE_OK) { ++ syslog(LOG_WARNING, "sieve_register_parse_error() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ rewind(stream); ++ ++ *errstr = (char *) xmalloc(20 * sizeof(char)); ++ strcpy(*errstr, "script errors:\r\n"); ++ ++ res = sieve_script_parse(i, stream, errstr, &s); ++ ++ if (res == SIEVE_OK) { ++ if(ret) { ++ *ret = s; ++ } else { ++ sieve_script_free(&s); ++ } ++ free(*errstr); ++ *errstr = NULL; ++ } ++ ++ /* free interpreter */ ++ sieve_interp_free(&i); ++ ++ return (res == SIEVE_OK) ? TIMSIEVE_OK : TIMSIEVE_FAIL; ++} ++ ++/* ++ * Btw the initial date of this patch is Sep, 02 2004 which is the birthday of ++ * Pavlos. Author of cyrusmaster. So consider this patch as his birthday present ++ */ ++ +diff -Naur cyrus-imapd-2.4.4.orig/imap/compile_sieve.c cyrus-imapd-2.4.4/imap/compile_sieve.c +--- cyrus-imapd-2.4.4.orig/imap/compile_sieve.c 1970-01-01 01:00:00.000000000 +0100 ++++ cyrus-imapd-2.4.4/imap/compile_sieve.c 2010-11-16 08:48:37.724064645 +0100 +@@ -0,0 +1,365 @@ ++/* This tool compiles the sieve script from a command ++line so that it can be used wby the autoadd patch */ ++#include ++#include ++ ++#include ++#include ++#ifdef HAVE_UNISTD_H ++#include ++#endif ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "global.h" ++ ++#include "util.h" ++#include "xmalloc.h" ++#include "xstrlcpy.h" ++#include "xstrlcat.h" ++#include "mailbox.h" ++#include "imap_err.h" ++#include "sieve_interface.h" ++#include "script.h" ++ ++#include ++ ++#define TIMSIEVE_FAIL -1 ++#define TIMSIEVE_OK 0 ++#define MAX_FILENAME_SIZE 100 ++ ++/* Needed by libconfig */ ++const int config_need_data = 0; ++ ++static int is_script_parsable(FILE *stream, char **errstr, sieve_script_t **ret); ++ ++/*static void fatal(const char *s, int code) ++{ ++ printf("Fatal error: %s (%d)\r\n", s, code); ++ ++ exit(1); ++}*/ ++ ++void usage(void) ++{ ++ fprintf(stderr, ++ "Usage:\n\tcompile_sieve [-C ] [-i -o ]\n"); ++ exit(-1); ++} ++ ++ ++int main (int argc, char **argv) ++{ ++ ++ sieve_script_t *s = NULL; ++ bytecode_info_t *bc = NULL; ++ char *err = NULL; ++ FILE *in_stream; ++ int out_fd, opt; ++ char *source_script = NULL; ++ char *compiled_source_script = NULL; ++ char *alt_config = NULL; ++ extern char *optarg; ++ char sieve_tmpname[MAX_MAILBOX_NAME+1]; ++ ++ if (geteuid() == 0) fatal("must run as the Cyrus user", EC_USAGE); ++ ++ while((opt = getopt(argc, argv, "C:i:o:")) != EOF) { ++ switch (opt) { ++ case 'C': /* alt config file */ ++ alt_config = optarg; ++ break; ++ case 'i': /* input script file */ ++ source_script = optarg; ++ break; ++ case 'o': /* output script file */ ++ compiled_source_script = optarg; ++ break; ++ default: ++ usage(); ++ break; ++ } ++ } ++ ++ if(source_script && !compiled_source_script) { ++ fprintf(stderr, "No output file was defined\n"); ++ usage(); ++ } else if (!source_script && compiled_source_script) { ++ fprintf(stderr, "No input file was defined\n"); ++ usage(); ++ } ++ ++ /* ++ * If no has been defined, then read them from ++ * the configuration file. ++ */ ++ if (!source_script && !compiled_source_script) { ++ cyrus_init(alt_config, "compile_sieve", 0); ++ ++ /* Initially check if we want to have the sieve script created */ ++ if(!(source_script = (char *) config_getstring(IMAPOPT_AUTOCREATE_SIEVE_SCRIPT))) { ++ fprintf(stderr,"autocreate_sieve_script option not defined. Check imapd.conf\n"); ++ return 1; ++ } ++ ++ /* Check if we have an already compiled sieve script*/ ++ if(!(compiled_source_script = (char *) config_getstring(IMAPOPT_AUTOCREATE_SIEVE_COMPILEDSCRIPT))) { ++ fprintf(stderr, "autocreate_sieve_compiledscript option not defined. Check imapd.conf\n"); ++ return 1; ++ } ++ ++ if(!strrchr(source_script,'/') || !strrchr(compiled_source_script,'/')) { ++ /* ++ * At this point the only think that is inconsistent is the directory ++ * that was created. But if the user will have any sieve scripts then ++ * they will eventually go there, so no big deal ++ */ ++ fprintf(stderr, ++ "In imapd.conf the full path of the filenames must be defined\n"); ++ return 1; ++ } ++ } ++ ++ printf("input file : %s, output file : %s\n", source_script, compiled_source_script); ++ ++ ++ if(strlen(compiled_source_script) + sizeof(".NEW") + 1 > sizeof(sieve_tmpname)) { ++ fprintf(stderr, "Filename %s is too big\n", compiled_source_script); ++ return 1; ++ } ++ ++ snprintf(sieve_tmpname, sizeof(sieve_tmpname), "%s.NEW", compiled_source_script); ++ ++ in_stream = fopen(source_script,"r"); ++ ++ if(!in_stream) { ++ fprintf(stderr,"Unable to open %s source sieve script\n",source_script); ++ return 1; ++ } ++ ++ /* ++ * We open the file that will be used as the bc file. If this file exists, overwrite it ++ * since something bad has happened. We open the file here so that this error checking is ++ * done before we try to open the rest of the files to start copying etc. ++ */ ++ out_fd = open(sieve_tmpname, O_CREAT|O_EXCL|O_WRONLY, S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH); ++ if(out_fd < 0) { ++ if(errno == EEXIST) { ++ fprintf(stderr, "File %s already exists\n", sieve_tmpname); ++ } else if (errno == EACCES) { ++ fprintf(stderr,"No access to create file %s. Please check that you have the correct permissions\n", ++ sieve_tmpname); ++ } else { ++ fprintf(stderr,"Unable to create %s. Please check that you have the correct permissions\n", ++ sieve_tmpname); ++ } ++ ++ fclose(in_stream); ++ return 1; ++ } ++ ++ if(is_script_parsable(in_stream,&err, &s) == TIMSIEVE_FAIL) { ++ if(err && *err) { ++ fprintf(stderr, "Error while parsing script %s\n",err); ++ free(err); ++ } ++ else ++ fprintf(stderr,"Error while parsing script\n"); ++ unlink(sieve_tmpname); ++ fclose(in_stream); ++ close(out_fd); ++ return 1; ++ } ++ ++ ++ /* generate the bytecode */ ++ if(sieve_generate_bytecode(&bc,s) == TIMSIEVE_FAIL) { ++ fprintf(stderr,"Error occured while compiling sieve script\n"); ++ /* removing the copied script and cleaning up memory */ ++ unlink(sieve_tmpname); ++ sieve_script_free(&s); ++ fclose(in_stream); ++ close(out_fd); ++ return 1; ++ } ++ if(sieve_emit_bytecode(out_fd,bc) == TIMSIEVE_FAIL) { ++ fprintf(stderr, "Error occured while emitting sieve script\n"); ++ unlink(sieve_tmpname); ++ sieve_free_bytecode(&bc); ++ sieve_script_free(&s); ++ fclose(in_stream); ++ close(out_fd); ++ return 1; ++ } ++ ++ /* clean up the memory */ ++ sieve_free_bytecode(&bc); ++ sieve_script_free(&s); ++ ++ close(out_fd); ++ ++ if(rename(sieve_tmpname, compiled_source_script)) { ++ if(errno != EEXIST) { ++ unlink(sieve_tmpname); ++ unlink(compiled_source_script); ++ return 1; ++ } ++ } ++ return 0; ++} ++ ++ ++/* to make larry's stupid functions happy :) */ ++static void foo(void) ++{ ++ fatal("stub function called", 0); ++} ++ ++extern sieve_vacation_t vacation2;/* = { ++ 0, / min response / ++ 0, / max response / ++ (sieve_callback *) &foo, / autorespond() / ++ (sieve_callback *) &foo / send_response() / ++}; */ ++ ++static int sieve_notify(void *ac __attribute__((unused)), ++ void *interp_context __attribute__((unused)), ++ void *script_context __attribute__((unused)), ++ void *message_context __attribute__((unused)), ++ const char **errmsg __attribute__((unused))) ++{ ++ fatal("stub function called", 0); ++ return SIEVE_FAIL; ++} ++ ++static int mysieve_error(int lineno, const char *msg, ++ void *i __attribute__((unused)), void *s) ++{ ++ char buf[1024]; ++ char **errstr = (char **) s; ++ ++ snprintf(buf, 80, "line %d: %s\r\n", lineno, msg); ++ *errstr = (char *) xrealloc(*errstr, strlen(*errstr) + strlen(buf) + 30); ++ fprintf(stderr, "%s\n", buf); ++ strcat(*errstr, buf); ++ ++ return SIEVE_OK; ++} ++ ++/* end the boilerplate */ ++ ++/* returns TRUE or FALSE */ ++int is_script_parsable(FILE *stream, char **errstr, sieve_script_t **ret) ++{ ++ sieve_interp_t *i; ++ sieve_script_t *s; ++ int res; ++ ++ res = sieve_interp_alloc(&i, NULL); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_interp_alloc() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_redirect(i, (sieve_callback *) &foo); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_register_redirect() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ res = sieve_register_discard(i, (sieve_callback *) &foo); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_register_discard() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ res = sieve_register_reject(i, (sieve_callback *) &foo); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_register_reject() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ res = sieve_register_fileinto(i, (sieve_callback *) &foo); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_register_fileinto() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ res = sieve_register_keep(i, (sieve_callback *) &foo); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_register_keep() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_imapflags(i, NULL); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_register_imapflags() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_size(i, (sieve_get_size *) &foo); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_register_size() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_header(i, (sieve_get_header *) &foo); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_register_header() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_envelope(i, (sieve_get_envelope *) &foo); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_register_envelope() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_vacation(i, &vacation2); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_register_vacation() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_notify(i, &sieve_notify); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_register_notify() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ res = sieve_register_parse_error(i, &mysieve_error); ++ if (res != SIEVE_OK) { ++ fprintf(stderr, "sieve_register_parse_error() returns %d\n", res); ++ return TIMSIEVE_FAIL; ++ } ++ ++ rewind(stream); ++ ++ *errstr = (char *) xmalloc(20 * sizeof(char)); ++ strcpy(*errstr, "script errors:\r\n"); ++ ++ res = sieve_script_parse(i, stream, errstr, &s); ++ ++ if (res == SIEVE_OK) { ++ if(ret) { ++ *ret = s; ++ } else { ++ sieve_script_free(&s); ++ } ++ free(*errstr); ++ *errstr = NULL; ++ } ++ ++ /* free interpreter */ ++ sieve_interp_free(&i); ++ ++ return (res == SIEVE_OK) ? TIMSIEVE_OK : TIMSIEVE_FAIL; ++} ++ ++ ++ ++ ++ ++ +diff -Naur cyrus-imapd-2.4.4.orig/imap/imapd.c cyrus-imapd-2.4.4/imap/imapd.c +--- cyrus-imapd-2.4.4.orig/imap/imapd.c 2010-11-16 08:48:20.829659918 +0100 ++++ cyrus-imapd-2.4.4/imap/imapd.c 2010-11-16 08:48:37.728081052 +0100 +@@ -269,6 +269,7 @@ + void motd_file(int fd); + void shut_down(int code); + void fatal(const char *s, int code); ++void autocreate_inbox(void); + + void cmdloop(void); + void cmd_login(char *tag, char *user); +@@ -2102,8 +2103,47 @@ + mboxname_hiersep_tointernal(&imapd_namespace, imapd_userid, + config_virtdomains ? + strcspn(imapd_userid, "@") : 0); ++ ++ autocreate_inbox(); ++} ++ ++/* ++ * Autocreate Inbox and subfolders upon login ++ */ ++void autocreate_inbox() ++{ ++ char inboxname[MAX_MAILBOX_NAME+1]; ++ int autocreatequota; ++ int r; ++ ++ /* ++ * Exlude admin's accounts ++ */ ++ if (imapd_userisadmin || imapd_userisproxyadmin) ++ return; ++ ++ /* ++ * Exclude anonymous ++ */ ++ if (!strcmp(imapd_userid, "anonymous")) ++ return; ++ ++ if ((autocreatequota = config_getint(IMAPOPT_AUTOCREATEQUOTA))) { ++ /* This is actyally not required ++ as long as the lenght of userid is ok */ ++ r = (*imapd_namespace.mboxname_tointernal) (&imapd_namespace, ++ "INBOX", imapd_userid, inboxname); ++ if (!r) ++ r = mboxlist_lookup(inboxname, NULL, NULL); ++ ++ if (r == IMAP_MAILBOX_NONEXISTENT) { ++ mboxlist_autocreateinbox(&imapd_namespace, imapd_userid, ++ imapd_authstate, inboxname, autocreatequota); ++ } ++ } + } + ++ + /* + * Perform a LOGIN command + */ +@@ -5880,6 +5920,8 @@ + goto freeargs; + } + ++ autocreate_inbox(); ++ + return; + + freeargs: +diff -Naur cyrus-imapd-2.4.4.orig/imap/lmtpd.c cyrus-imapd-2.4.4/imap/lmtpd.c +--- cyrus-imapd-2.4.4.orig/imap/lmtpd.c 2010-11-16 08:48:20.824640875 +0100 ++++ cyrus-imapd-2.4.4/imap/lmtpd.c 2010-11-16 08:48:37.729084805 +0100 +@@ -119,6 +119,8 @@ + static FILE *spoolfile(message_data_t *msgdata); + static void removespool(message_data_t *msgdata); + ++static int autocreate_inbox(const char *user, const char *domain); ++ + /* current namespace */ + static struct namespace lmtpd_namespace; + +@@ -976,6 +978,86 @@ + exit(code); + } + ++ ++/* ++ * Autocreate Inbox and subfolders upon login ++ */ ++int autocreate_inbox(const char *user, const char *domain) ++{ ++ struct auth_state *auth_state; ++ char inboxname[MAX_MAILBOX_NAME+1]; ++ char *rcpt_userid = NULL; ++ int autocreatequota; ++ int r = 0; ++ ++ if (user == NULL) ++ return IMAP_MAILBOX_NONEXISTENT; ++ ++ if (domain != NULL) { ++ int k; ++ ++ rcpt_userid = (char *) xmalloc((strlen(user) + strlen(domain) + 2) * sizeof(char)); ++ k = strlcpy(rcpt_userid, user, strlen(user) + 1); ++ *(rcpt_userid + k) = '@'; ++ strlcpy(rcpt_userid + k + 1, domain, strlen(domain) + 1); ++ } else { ++ rcpt_userid = (char *) user; ++ } ++ ++ ++ /* ++ * Exclude anonymous ++ */ ++ if (!strcmp(rcpt_userid, "anonymous")) { ++ if (rcpt_userid != user) { ++ free(rcpt_userid); ++ } ++ ++ return IMAP_MAILBOX_NONEXISTENT; ++ } ++ ++ /* ++ * Check for autocreatequota and createonpost ++ */ ++ if (!(autocreatequota = config_getint(IMAPOPT_AUTOCREATEQUOTA)) || ++ !(config_getswitch(IMAPOPT_CREATEONPOST))) { ++ ++ if (rcpt_userid != user) { ++ free(rcpt_userid); ++ } ++ ++ return IMAP_MAILBOX_NONEXISTENT; ++ } ++ ++ ++ /* ++ * Exclude admin's accounts ++ */ ++ auth_state = auth_newstate(rcpt_userid); ++ ++ if (global_authisa(auth_state, IMAPOPT_ADMINS)) { ++ if (rcpt_userid != user) { ++ free(rcpt_userid); ++ } ++ ++ return IMAP_MAILBOX_NONEXISTENT; ++ } ++ ++ r = (*lmtpd_namespace.mboxname_tointernal) (&lmtpd_namespace, ++ "INBOX", rcpt_userid, inboxname); ++ ++ if (!r) ++ r = mboxlist_autocreateinbox(&lmtpd_namespace, rcpt_userid, ++ auth_state, inboxname, autocreatequota); ++ ++ if (rcpt_userid != user) { ++ free(rcpt_userid); ++ } ++ ++ return r; ++} ++ ++ + static int verify_user(const char *user, const char *domain, char *mailbox, + quota_t quotacheck, struct auth_state *authstate) + { +@@ -1019,6 +1101,15 @@ + */ + r = mlookup(namebuf, &server, &acl, NULL); + ++ /* If user mailbox does not exist, then invoke autocreate inbox function */ ++ if (r == IMAP_MAILBOX_NONEXISTENT) { ++ r = autocreate_inbox(user, domain); ++ ++ /* Try to locate the mailbox again */ ++ if (!r) ++ r = mlookup(namebuf, &server, &acl, NULL); ++ } ++ + if (r == IMAP_MAILBOX_NONEXISTENT && !user && + config_getswitch(IMAPOPT_LMTP_FUZZY_MAILBOX_MATCH) && + /* see if we have a mailbox whose name is close */ +@@ -1045,6 +1136,7 @@ + aclcheck, (quotacheck < 0) + || config_getswitch(IMAPOPT_LMTP_STRICT_QUOTA) ? + quotacheck : 0); ++ + } + } + +diff -Naur cyrus-imapd-2.4.4.orig/imap/mboxlist.c cyrus-imapd-2.4.4/imap/mboxlist.c +--- cyrus-imapd-2.4.4.orig/imap/mboxlist.c 2010-11-16 08:48:20.818616124 +0100 ++++ cyrus-imapd-2.4.4/imap/mboxlist.c 2010-11-16 08:48:37.732096343 +0100 +@@ -84,6 +84,12 @@ + #include "quota.h" + #include "sync_log.h" + ++#ifdef USE_SIEVE ++extern int autoadd_sieve(char *userid, ++ const char *source_script); ++#endif ++ ++ + #define DB config_mboxlist_db + #define SUBDB config_subscription_db + +@@ -100,6 +106,19 @@ + void *rock); + static int mboxlist_changequota(const char *name, int matchlen, int maycreate, + void *rock); ++static int mboxlist_autosubscribe_sharedfolders(struct namespace *namespace, ++ char *userid, char *auth_userid, ++ struct auth_state *auth_state); ++ ++/* ++ * Struct needed to be passed as void *rock to ++ * mboxlist_autochangesub(); ++ */ ++struct changesub_rock_st { ++ char *userid; ++ char *auth_userid; ++ struct auth_state *auth_state; ++}; + + char *mboxlist_makeentry(int mbtype, const char *part, const char *acl) + { +@@ -2996,3 +3015,349 @@ + + return(count); + } ++ ++/* ++ * Automatically subscribe user to *ALL* shared folders, ++ * one has permissions to be subscribed to. ++ * INBOX subfolders are excluded. ++ */ ++static int mboxlist_autochangesub(char *name, int matchlen, int maycreate, ++ void *rock) { ++ ++ struct changesub_rock_st *changesub_rock = (struct changesub_rock_st *) rock; ++ char *userid = changesub_rock->userid; ++ char *auth_userid = changesub_rock->auth_userid; ++ struct auth_state *auth_state = changesub_rock->auth_state; ++ int r; ++ ++ ++ if((strlen(name) == 5 && !strncmp(name, "INBOX", 5)) || /* Exclude INBOX */ ++ (strlen(name) > 5 && !strncmp(name, "INBOX.",6)) || /* Exclude INBOX subfolders */ ++ (strlen(name) > 4 && !strncmp(name, "user.", 5))) /* Exclude other users' folders */ ++ return 0; ++ ++ ++ r = mboxlist_changesub(name, userid, auth_state, 1, 0); ++ ++ if (r) { ++ syslog(LOG_WARNING, ++ "autosubscribe: User %s to folder %s, subscription failed: %s", ++ auth_userid, name, error_message(r)); ++ } else { ++ syslog(LOG_NOTICE, ++ "autosubscribe: User %s to folder %s, subscription succeeded", ++ auth_userid, name); ++ } ++ ++ return 0; ++} ++ ++#define SEP '|' ++ ++/* ++ * Automatically subscribe user to a shared folder. ++ * Subscription is done successfully, if the shared ++ * folder exists and the user has the necessary ++ * permissions. ++ */ ++static int mboxlist_autosubscribe_sharedfolders(struct namespace *namespace, ++ char *userid, char *auth_userid, ++ struct auth_state *auth_state) { ++ ++ const char *sub ; ++ char *p, *q, *next_sub; ++ char folder[MAX_MAILBOX_NAME+1], name[MAX_MAILBOX_NAME+1], mailboxname[MAX_MAILBOX_NAME+1]; ++ int len; ++ int r = 0; ++ int subscribe_all_sharedfolders = 0; ++ ++ subscribe_all_sharedfolders = config_getswitch(IMAPOPT_AUTOSUBSCRIBE_ALL_SHAREDFOLDERS); ++ ++ /* ++ * If subscribeallsharedfolders is set to yes in imapd.conf, then ++ * subscribe user to every shared folder one has the apropriate ++ * permissions. ++ */ ++ if(subscribe_all_sharedfolders) { ++ char pattern[MAX_MAILBOX_PATH+1]; ++ struct changesub_rock_st changesub_rock; ++ ++ strcpy(pattern, "*"); ++ changesub_rock.userid = userid; ++ changesub_rock.auth_userid = auth_userid; ++ changesub_rock.auth_state = auth_state; ++ ++ r = mboxlist_findall(namespace, pattern, 0, userid, ++ auth_state, mboxlist_autochangesub, &changesub_rock); ++ ++ return r; ++ } ++ ++ if ((sub=config_getstring(IMAPOPT_AUTOSUBSCRIBESHAREDFOLDERS)) == NULL) ++ return r; ++ ++ next_sub = (char *) sub; ++ while (*next_sub) { ++ for (p = next_sub ; isspace((int) *p) || *p == SEP ; p++); ++ for (next_sub = p ; *next_sub && *next_sub != SEP ; next_sub++); ++ for (q = next_sub ; q > p && (isspace((int) *q) || *q == SEP || !*q) ; q--); ++ if (!*p ) continue; ++ ++ len = q - p + 1; ++ /* Check for folder length */ ++ if (len > sizeof(folder)-1) ++ continue; ++ ++ if (!r) { ++ strncpy(folder, p, len); ++ folder[len] = '\0'; ++ ++ strlcpy(name, namespace->prefix[NAMESPACE_SHARED], sizeof(name)); ++ len = strlcat(name, folder, sizeof(name)); ++ ++ r = (namespace->mboxname_tointernal) (namespace, name, userid, ++ mailboxname); ++ } ++ ++ if (!r) ++ r = mboxlist_changesub(mailboxname, userid, auth_state, 1, 0); ++ ++ if (!r) { ++ syslog(LOG_NOTICE, "autosubscribe: User %s to %s succeeded", ++ userid, folder); ++ } else { ++ syslog(LOG_WARNING, "autosubscribe: User %s to %s failed: %s", ++ userid, folder, error_message(r)); ++ r = 0; ++ } ++ } ++ ++ return r; ++} ++ ++ ++ ++int mboxlist_autocreateinbox(struct namespace *namespace, ++ char *userid, ++ struct auth_state *auth_state, ++ char *mailboxname, int autocreatequota) { ++ char name [MAX_MAILBOX_NAME+1]; ++ char folder [MAX_MAILBOX_NAME+1]; ++ char *auth_userid = NULL; ++ char *partition = NULL; ++ const char *crt; ++ const char *sub; ++ char *p, *q, *next_crt, *next_sub; ++ int len; ++ int r = 0; ++ int numcrt = 0; ++ int numsub = 0; ++#ifdef USE_SIEVE ++ const char *source_script; ++#endif ++ ++ ++ ++ auth_userid = auth_canonuser(auth_state); ++ if (auth_userid == NULL) { ++ /* ++ * Couldn't get cannon userid ++ */ ++ syslog(LOG_ERR, ++ "autocreateinbox: Could not get canonified userid for user %s", userid); ++ return IMAP_PARTITION_UNKNOWN; ++ } ++ ++ /* Added this for debug information. */ ++ syslog(LOG_DEBUG, "autocreateinbox: autocreate inbox for user %s was called", auth_userid); ++ ++ /* ++ * While this is not needed for admins ++ * and imap_admins accounts, it would be ++ * better to separate *all* admins and ++ * proxyservers from normal accounts ++ * (accounts that have mailboxes). ++ * UOA Specific note(1): Even if we do not ++ * exclude these servers-classes here, ++ * UOA specific code, will neither return ++ * role, nor create INBOX, because none of these ++ * administrative accounts belong to the ++ * mailRecipient objectclass, or have imapPartition. ++ * UOA Specific note(2): Another good reason for doing ++ * this, is to prevent the code, from getting into ++ * cyrus_ldap.c because of the continues MSA logins to LMTPd. ++ */ ++ ++ /* ++ * admins and the coresponding imap ++ * service, had already been excluded. ++ */ ++ ++ /* ++ * Do we really need group membership ++ * for admins or service_admins? ++ */ ++ if (global_authisa(auth_state, IMAPOPT_ADMINS)) return 0; ++ ++ /* ++ * Do we really need group membership ++ * for proxyservers? ++ */ ++ if (global_authisa(auth_state, IMAPOPT_PROXYSERVERS)) return 0; ++ ++ /* ++ * Check if user belongs to the autocreate_users group. This option ++ * controls for whom the mailbox may be automatically created. Default ++ * value for this option is 'anyone'. So, if not declared, all mailboxes ++ * will be created. ++ */ ++ if (!global_authisa(auth_state, IMAPOPT_AUTOCREATE_USERS)) { ++ syslog(LOG_DEBUG, "autocreateinbox: User %s does not belong to the autocreate_users. No mailbox is created", ++ auth_userid); ++ return IMAP_MAILBOX_NONEXISTENT; ++ } ++ ++#if 0 ++ /* ++ * Get Partition info or return. ++ * (Here you should propably use ++ * you own "get_partition(char *userid)" ++ * function. Otherwise all new INBOXes will be ++ * created into whatever partition has been declared ++ * as default in your imapd.conf) ++ */ ++ ++ partition = get_partition(userid); ++ if (partition == NULL) { ++ /* ++ * Couldn't get partition info ++ */ ++ syslog(LOG_ERR, ++ "Could not get imapPartition info for user %s", userid); ++ return IMAP_PARTITION_UNKNOWN; ++ } ++#endif ++ ++ r = mboxlist_createmailbox(mailboxname, 0, NULL, ++ 1, userid, auth_state, 0, 0, 0); ++ ++ if (!r && autocreatequota > 0) ++ r = mboxlist_setquota(mailboxname, autocreatequota, 0); ++ ++ if (!r) ++ r = mboxlist_changesub(mailboxname, userid, ++ auth_state, 1, 1); ++ ++ if (!r) { ++ syslog(LOG_NOTICE, "autocreateinbox: User %s, INBOX was successfully created in partition %s", ++ auth_userid, partition == NULL ? "default" : partition); ++ } else { ++ syslog(LOG_ERR, "autocreateinbox: User %s, INBOX failed. %s", ++ auth_userid, error_message(r)); ++ } ++ ++#if 0 ++ /* Allocated from get_partition, and not needed any more */ ++ free_partition(partition); ++#endif ++ ++ if (r) return r; ++ ++ /* INBOX's subfolders */ ++ if ((crt=config_getstring(IMAPOPT_AUTOCREATEINBOXFOLDERS))) ++ sub=config_getstring(IMAPOPT_AUTOSUBSCRIBEINBOXFOLDERS); ++ ++ /* Roll through crt */ ++ next_crt = (char *) crt; ++ while (next_crt!=NULL && *next_crt) { ++ for (p = next_crt ; isspace((int) *p) || *p == SEP ; p++); ++ for (next_crt = p ; *next_crt && *next_crt != SEP ; next_crt++); ++ for (q = next_crt ; q > p && (isspace((int) *q) || *q == SEP || !*q); q--); ++ ++ if (!*p) continue; ++ ++ len = q - p + 1; ++ ++ /* First time we check for length */ ++ if (len > sizeof(folder) - 5) ++ r = IMAP_MAILBOX_BADNAME; ++ ++ if (!r) { ++ strncpy(folder, p, len); ++ folder[len] = '\0'; ++ ++ strlcpy(name, namespace->prefix[NAMESPACE_INBOX], sizeof(name)); ++ len = strlcat(name, folder, sizeof(name)); ++ } ++ ++ if (!r) ++ r = (namespace->mboxname_tointernal) (namespace, name, userid, ++ mailboxname); ++ if (!r) ++ r = mboxlist_createmailbox(mailboxname, 0, NULL, ++ 1, userid, auth_state, 0, 0, 0); ++ ++ if (!r) { ++ numcrt++; ++ syslog(LOG_NOTICE, "autocreateinbox: User %s, subfolder %s creation succeeded.", ++ auth_userid, name); ++ } else { ++ syslog(LOG_WARNING, "autocreateinbox: User %s, subfolder %s creation failed. %s", ++ auth_userid, name, error_message(r)); ++ r=0; ++ continue; ++ } ++ ++ /* Roll through sub */ ++ next_sub = (char *) sub; ++ while (next_sub!=NULL && *next_sub) { ++ for (p = next_sub ; isspace((int) *p) || *p == SEP ; p++); ++ for (next_sub = p ; *next_sub && *next_sub != SEP ; next_sub++); ++ for (q = next_sub ; q > p && (isspace((int) *q) || *q == SEP || !*q) ; q--); ++ if (!*p ) continue; ++ ++ len = q - p + 1; ++ ++ if (len != strlen(folder) || strncmp(folder, p, len)) ++ continue; ++ ++ r = mboxlist_changesub(mailboxname, userid, auth_state, 1, 1); ++ ++ if (!r) { ++ numsub++; ++ syslog(LOG_NOTICE,"autocreateinbox: User %s, subscription to %s succeeded", ++ auth_userid, name); ++ } else ++ syslog(LOG_WARNING, "autocreateinbox: User %s, subscription to %s failed. %s", ++ auth_userid, name, error_message(r)); ++ ++ break; ++ } ++ } ++ ++ if (crt!=NULL && *crt) ++ syslog(LOG_INFO, "User %s, Inbox subfolders, created %d, subscribed %d", ++ auth_userid, numcrt, numsub); ++ ++ /* ++ * Check if shared folders are available for subscription. ++ */ ++ mboxlist_autosubscribe_sharedfolders(namespace, userid, auth_userid, auth_state); ++ ++#ifdef USE_SIEVE ++ /* ++ * Here the autocreate sieve script feature is iniated from. ++ */ ++ source_script = config_getstring(IMAPOPT_AUTOCREATE_SIEVE_SCRIPT); ++ ++ if (source_script) { ++ if (!autoadd_sieve(userid, source_script)) ++ syslog(LOG_NOTICE, "autocreate_sieve: User %s, default sieve script creation succeeded", auth_userid); ++ else ++ syslog(LOG_WARNING, "autocreate_sieve: User %s, default sieve script creation failed", auth_userid); ++ } ++#endif ++ ++ return r; ++} ++ +diff -Naur cyrus-imapd-2.4.4.orig/imap/mboxlist.h cyrus-imapd-2.4.4/imap/mboxlist.h +--- cyrus-imapd-2.4.4.orig/imap/mboxlist.h 2010-11-16 08:48:20.828655886 +0100 ++++ cyrus-imapd-2.4.4/imap/mboxlist.h 2010-11-16 08:48:37.732096343 +0100 +@@ -221,4 +221,9 @@ + const char *userid, + struct auth_state *authstate); + ++int mboxlist_autocreateinbox(struct namespace *namespace,char *userid, ++ struct auth_state *auth_state, char *mailboxname, ++ int autocreatequota); ++ ++ + #endif +diff -Naur cyrus-imapd-2.4.4.orig/imap/pop3d.c cyrus-imapd-2.4.4/imap/pop3d.c +--- cyrus-imapd-2.4.4.orig/imap/pop3d.c 2010-11-16 08:48:20.820623909 +0100 ++++ cyrus-imapd-2.4.4/imap/pop3d.c 2010-11-16 08:48:37.734104407 +0100 +@@ -181,6 +181,8 @@ + static char popd_apop_chal[45 + MAXHOSTNAMELEN + 1]; /* */ + static void cmd_apop(char *response); + ++static int autocreate_inbox(char *inboxname, char *userid); ++ + static void cmd_auth(char *arg); + static void cmd_capa(void); + static void cmd_pass(char *pass); +@@ -1389,6 +1391,7 @@ + popd_userid = xstrdup(userbuf); + prot_printf(popd_out, "+OK Name is a valid mailbox\r\n"); + } ++ + } + + void cmd_pass(char *pass) +@@ -1692,6 +1695,43 @@ + } + + /* ++ * Autocreate Inbox and subfolders upon login ++ */ ++int autocreate_inbox(char *inboxname, char *auth_userid) ++{ ++ struct auth_state *auth_state; ++ int autocreatequota; ++ int r; ++ ++ if (inboxname == NULL || auth_userid == NULL) ++ return IMAP_MAILBOX_NONEXISTENT; ++ ++ /* ++ * Exclude anonymous ++ */ ++ if (!strcmp(popd_userid, "anonymous")) ++ return IMAP_MAILBOX_NONEXISTENT; ++ ++ /* ++ * Check for autocreatequota ++ */ ++ if (!(autocreatequota = config_getint(IMAPOPT_AUTOCREATEQUOTA))) ++ return IMAP_MAILBOX_NONEXISTENT; ++ ++ /* ++ * Exclude admin's accounts ++ */ ++ auth_state = auth_newstate(popd_userid); ++ if (global_authisa(auth_state, IMAPOPT_ADMINS)) ++ return IMAP_MAILBOX_NONEXISTENT; ++ ++ r = mboxlist_autocreateinbox(&popd_namespace, auth_userid, ++ auth_state, inboxname, autocreatequota); ++ return r; ++} ++ ++ ++/* + * Complete the login process by opening and locking the user's inbox + */ + int openinbox(void) +@@ -1720,6 +1760,12 @@ + userid, inboxname); + + if (!r) r = mboxlist_lookup(inboxname, &mbentry, NULL); ++ ++ /* Try once again after autocreate_inbox */ ++ if (r == IMAP_MAILBOX_NONEXISTENT && ++ !(r = autocreate_inbox(inboxname, userid))) ++ r = mboxlist_lookup(inboxname, &mbentry, NULL); ++ + if (!r && (config_popuseacl = config_getswitch(IMAPOPT_POPUSEACL)) && + (!mbentry.acl || + !((myrights = cyrus_acl_myrights(popd_authstate, mbentry.acl)) & ACL_READ))) { +diff -Naur cyrus-imapd-2.4.4.orig/lib/auth.c cyrus-imapd-2.4.4/lib/auth.c +--- cyrus-imapd-2.4.4.orig/lib/auth.c 2010-11-16 08:48:20.875850421 +0100 ++++ cyrus-imapd-2.4.4/lib/auth.c 2010-11-16 08:48:37.755228749 +0100 +@@ -118,3 +118,11 @@ + + auth->freestate(auth_state); + } ++ ++char *auth_canonuser(struct auth_state *auth_state) ++{ ++ struct auth_mech *auth = auth_fromname(); ++ ++ return auth->auth_canonuser(auth_state); ++} ++ +diff -Naur cyrus-imapd-2.4.4.orig/lib/auth.h cyrus-imapd-2.4.4/lib/auth.h +--- cyrus-imapd-2.4.4.orig/lib/auth.h 2010-11-16 08:48:20.881874054 +0100 ++++ cyrus-imapd-2.4.4/lib/auth.h 2010-11-16 08:48:37.755228749 +0100 +@@ -55,6 +55,7 @@ + const char *identifier); + struct auth_state *(*newstate)(const char *identifier); + void (*freestate)(struct auth_state *auth_state); ++ char *(*auth_canonuser)(struct auth_state *auth_state); + }; + + extern struct auth_mech *auth_mechs[]; +@@ -77,5 +78,6 @@ + const char *identifier); + struct auth_state *auth_newstate(const char *identifier); + void auth_freestate(struct auth_state *auth_state); ++char *auth_canonuser(struct auth_state *auth_state); + + #endif /* INCLUDED_AUTH_H */ +diff -Naur cyrus-imapd-2.4.4.orig/lib/auth_krb.c cyrus-imapd-2.4.4/lib/auth_krb.c +--- cyrus-imapd-2.4.4.orig/lib/auth_krb.c 2010-11-16 08:48:20.885889903 +0100 ++++ cyrus-imapd-2.4.4/lib/auth_krb.c 2010-11-16 08:48:37.756232781 +0100 +@@ -341,6 +341,15 @@ + free((char *)auth_state); + } + ++static char *mycanonuser(struct auth_state *auth_state) ++{ ++ if (auth_state) ++ return auth_state->userid; ++ ++ return NULL; ++} ++ ++ + #else /* HAVE_KRB */ + + static int mymemberof( +@@ -372,6 +381,13 @@ + fatal("Authentication mechanism (krb) not compiled in", EC_CONFIG); + } + ++static char *mycanonuser( ++ struct auth_state *auth_state __attribute__((unused))) ++{ ++ fatal("Authentication mechanism (krb) not compiled in", EC_CONFIG); ++} ++ ++ + #endif + + struct auth_mech auth_krb = +@@ -382,4 +398,5 @@ + &mymemberof, + &mynewstate, + &myfreestate, ++ &mycanonuser, + }; +diff -Naur cyrus-imapd-2.4.4.orig/lib/auth_krb5.c cyrus-imapd-2.4.4/lib/auth_krb5.c +--- cyrus-imapd-2.4.4.orig/lib/auth_krb5.c 2010-11-16 08:48:20.877858205 +0100 ++++ cyrus-imapd-2.4.4/lib/auth_krb5.c 2010-11-16 08:48:37.756232781 +0100 +@@ -199,6 +199,14 @@ + free(auth_state); + } + ++static char *mycanonuser(struct auth_state *auth_state) ++{ ++ if (auth_state) ++ return auth_state->userid; ++ ++ return NULL; ++} ++ + #else /* HAVE_GSSAPI_H */ + + static int mymemberof( +@@ -230,6 +238,13 @@ + fatal("Authentication mechanism (krb5) not compiled in", EC_CONFIG); + } + ++static char *mycanonuser( ++ struct auth_state *auth_state __attribute__((unused))) ++{ ++ fatal("Authentication mechanism (krb5) not compiled in", EC_CONFIG); ++ return NULL; ++} ++ + #endif + + struct auth_mech auth_krb5 = +@@ -240,4 +255,5 @@ + &mymemberof, + &mynewstate, + &myfreestate, ++ &mycanonuser, + }; +diff -Naur cyrus-imapd-2.4.4.orig/lib/auth_pts.c cyrus-imapd-2.4.4/lib/auth_pts.c +--- cyrus-imapd-2.4.4.orig/lib/auth_pts.c 2010-11-16 08:48:20.877858205 +0100 ++++ cyrus-imapd-2.4.4/lib/auth_pts.c 2010-11-16 08:48:37.757236534 +0100 +@@ -512,6 +512,14 @@ + free(auth_state); + } + ++static char *mycanonuser(struct auth_state *auth_state) ++{ ++ if (auth_state) ++ return auth_state->userid.id; ++ ++ return NULL; ++} ++ + struct auth_mech auth_pts = + { + "pts", /* name */ +@@ -520,4 +528,5 @@ + &mymemberof, + &mynewstate, + &myfreestate, ++ &mycanonuser, + }; +diff -Naur cyrus-imapd-2.4.4.orig/lib/auth_unix.c cyrus-imapd-2.4.4/lib/auth_unix.c +--- cyrus-imapd-2.4.4.orig/lib/auth_unix.c 2010-11-16 08:48:20.880870301 +0100 ++++ cyrus-imapd-2.4.4/lib/auth_unix.c 2010-11-16 08:48:37.757236534 +0100 +@@ -315,6 +315,16 @@ + free((char *)auth_state); + } + ++static char *mycanonuser(auth_state) ++ struct auth_state *auth_state; ++{ ++ if (auth_state) ++ return auth_state->userid; ++ ++ return NULL; ++} ++ ++ + + struct auth_mech auth_unix = + { +@@ -324,4 +334,5 @@ + &mymemberof, + &mynewstate, + &myfreestate, ++ &mycanonuser, + }; +diff -Naur cyrus-imapd-2.4.4.orig/lib/imapoptions cyrus-imapd-2.4.4/lib/imapoptions +--- cyrus-imapd-2.4.4.orig/lib/imapoptions 2010-11-16 08:48:20.878862238 +0100 ++++ cyrus-imapd-2.4.4/lib/imapoptions 2010-11-16 08:48:37.759244877 +0100 +@@ -245,6 +245,55 @@ + /* Time in seconds. Any imap command that takes longer than this + time is logged. */ + ++{ "createonpost", 0, SWITCH } ++/* If yes, when lmtpd receives an incoming mail for an INBOX that does not exist, ++ then the INBOX is automatically created by lmtpd. */ ++ ++{ "autocreateinboxfolders", NULL, STRING } ++/* If a user does not have an INBOX created then the INBOX as well as some INBOX ++ subfolders are created under two conditions. ++ 1. The user logins via the IMAP or the POP3 protocol. (autocreatequota option must have a nonzero value) ++ 2. A message arrives for the user through the LMTPD protocol.(createonpost option must be yes) ++ autocreateinboxfolders is a list of INBOX's subfolders separated by a "|", that ++ are automatically created by the server under the previous two situations. */ ++ ++{ "autosubscribeinboxfolders", NULL, STRING } ++/* A list of folder names, separated by "|", that the users get automatically subscribed to, ++ when their INBOX is created. These folder names must have been included in the ++ autocreateinboxfolders option of the imapd.conf. */ ++ ++{ "autosubscribesharedfolders", NULL, STRING } ++/* A list of shared folders (bulletin boards), separated by "|", that the users get ++ automatically subscribed to, after their INBOX is created. The shared folder must ++ have been created and the user must have the required permissions to get subscribed ++ to it. Otherwise, subscribing to the shared folder fails. */ ++ ++{ "autosubscribe_all_sharedfolders", 0, SWITCH } ++/* If set to yes, the user is automatically subscribed to all shared folders, one has permission ++ to subscribe to. */ ++ ++{ "autocreate_sieve_script", NULL, STRING } ++/* The full path of a file that contains a sieve script. This script automatically becomes a ++ user's initial default sieve filter script. When this option is not defined, no default ++ sieve filter is created. The file must be readable by the cyrus daemon. */ ++ ++{ "autocreate_sieve_compiledscript", NULL, STRING } ++/* The full path of a file that contains a compiled in bytecode sieve script. This script ++ automatically becomes a user's initial default sieve filter script. If this option is ++ not specified, or the filename doesn't exist then the script defined by ++ autocreate_sieve_script is compiled on the fly and installed as the user's default ++ sieve script */ ++ ++{ "generate_compiled_sieve_script", 0, SWITCH } ++/* If set to yes and no compiled sieve script file exists, the sieve script which is ++ compiled on the fly will be saved in the file name that autocreate_sieve_compiledscript ++ option points to. In order a compiled script to be generated, autocreate_sieve_script and ++ autocreate_sieve_compiledscript must have valid values */ ++ ++{ "autocreate_users", "anyone", STRING } ++/* A space separated list of users and/or groups that are allowed their INBOX to be ++ automatically created. */ ++ + { "configdirectory", NULL, STRING } + /* The pathname of the IMAP configuration directory. This field is + required. */ +diff -Naur cyrus-imapd-2.4.4.orig/notifyd/Makefile.in cyrus-imapd-2.4.4/notifyd/Makefile.in +--- cyrus-imapd-2.4.4.orig/notifyd/Makefile.in 2010-11-16 08:48:20.897937729 +0100 ++++ cyrus-imapd-2.4.4/notifyd/Makefile.in 2010-11-16 08:48:37.769295255 +0100 +@@ -71,10 +71,11 @@ + SERVICE=../master/service.o + + IMAP_LIBS = @IMAP_LIBS@ @LIB_RT@ ++SIEVE_LIBS = @SIEVE_LIBS@ + IMAP_COM_ERR_LIBS = @IMAP_COM_ERR_LIBS@ + LIB_WRAP = @LIB_WRAP@ + LIBS = @ZEPHYR_LIBS@ @LIBS@ $(IMAP_COM_ERR_LIBS) +-DEPLIBS=../imap/mutex_fake.o ../imap/libimap.a ../lib/libcyrus.a ../lib/libcyrus_min.a @DEPLIBS@ ++DEPLIBS=../imap/mutex_fake.o ../imap/libimap.a $(SIEVE_LIBS) ../lib/libcyrus.a ../lib/libcyrus_min.a @DEPLIBS@ + + PURIFY=/usr/local/bin/purify + PUREOPT=-best-effort +diff -Naur cyrus-imapd-2.4.4.orig/notifyd/notifyd.c cyrus-imapd-2.4.4/notifyd/notifyd.c +--- cyrus-imapd-2.4.4.orig/notifyd/notifyd.c 2010-11-16 08:48:20.897937729 +0100 ++++ cyrus-imapd-2.4.4/notifyd/notifyd.c 2010-11-16 08:48:37.770300684 +0100 +@@ -98,7 +98,7 @@ + + #define NOTIFY_MAXSIZE 8192 + +-int do_notify() ++static int do_notify() + { + struct sockaddr_un sun_data; + socklen_t sunlen = sizeof(sun_data); +diff -Naur cyrus-imapd-2.4.4.orig/ptclient/Makefile.in cyrus-imapd-2.4.4/ptclient/Makefile.in +--- cyrus-imapd-2.4.4.orig/ptclient/Makefile.in 2010-11-16 08:48:20.800544944 +0100 ++++ cyrus-imapd-2.4.4/ptclient/Makefile.in 2010-11-16 08:48:37.770300684 +0100 +@@ -57,10 +57,11 @@ + AFS_LDFLAGS = @AFS_LDFLAGS@ @COM_ERR_LDFLAGS@ + AFS_LIBS = @AFS_LIBS@ + IMAP_LIBS = @IMAP_LIBS@ @LIB_RT@ ++SIEVE_LIBS = @SIEVE_LIBS@ + LIBS = $(IMAP_LIBS) @COM_ERR_LIBS@ + LIB_SASL = @LIB_SASL@ + LIB_WRAP = @LIB_WRAP@ +-DEPLIBS = ../imap/libimap.a ../lib/libcyrus.a ../lib/libcyrus_min.a @DEPLIBS@ ++DEPLIBS = ../imap/libimap.a $(SIEVE_LIBS) ../lib/libcyrus.a ../lib/libcyrus_min.a @DEPLIBS@ + UTIL_LIBS = ../imap/mutex_fake.o ../imap/cli_fatal.o + + LDAP_LIBS=@LDAP_LIBS@ diff --git a/network/cyrus-imapd/patches/cyrus-imapd-2.4.4-autosieve-0.6.0.patch b/network/cyrus-imapd/patches/cyrus-imapd-2.4.4-autosieve-0.6.0.patch new file mode 100644 index 0000000000..dee2af3f42 --- /dev/null +++ b/network/cyrus-imapd/patches/cyrus-imapd-2.4.4-autosieve-0.6.0.patch @@ -0,0 +1,182 @@ +diff -Naur cyrus-imapd-2.4.4.orig/README.autosievefolder cyrus-imapd-2.4.4/README.autosievefolder +--- cyrus-imapd-2.4.4.orig/README.autosievefolder 1970-01-01 01:00:00.000000000 +0100 ++++ cyrus-imapd-2.4.4/README.autosievefolder 2010-11-15 10:40:56.299163485 +0100 +@@ -0,0 +1,43 @@ ++Cyrus IMAP autosievefolder patch ++---------------------------------- ++ ++NOTE : This patch has been created at the University of Athens. For more info, as well ++as more patches on Cyrus IMAPD server, please visit http://email.uoa.gr ++ ++NOTE : Patch updated to Cyrus IMAPD 2.4.x by Martin Matuska ++ ++ When the lmtpd daemon receives an email message prior to delivering it to the ++INBOX folder of the user, checks if the user has specified sieve filters. If the ++user has specified sieve filters the filters are evaluated. If the message matches ++any of the filters the action that is specified in the filter is executed. If the action ++is FileInto it is stored in the subfolder specified in the filter. If the ++subfolder doesn't exist then the message is sent to the INBOX folder of the user. ++ ++ With this patch if the folder doesn't exist AND the name of the subfolder is ++specified in the autosievefolders option, OR the anysievefolder is set to ++yes in the cyrus-imap configuration file then the subfolder is created and the mail ++is stored there. ++ ++ ++Check the following options of the imapd.conf file ++================================================== ++ ++* anysievefolder : It must be "yes" in order to permit the autocreation of any ++INBOX subfolder requested by a sieve filter, through the "fileinto" action. (default = no) ++* autosievefolders : It is a "|" separated list of subfolders of INBOX that will be ++automatically created, if requested by a sieve filter, through the "fileinto" ++action. (default = null) ++ i.e. autosievefolders: Junk | Spam ++ ++WARNING: anysievefolder, takes precedence over autosievefolders . Which means that if ++anysievefolder is set to "yes", cyrus will create any INBOX subfolder requested, no-matter what the value of autosievefolders is. ++ ++ ++Things to be done ++================= ++ ++1. Support cyrus wildcards in the autosievefolders option. ++ ++ ++For more information and updates please visit http://email.uoa.gr/projects/cyrus/autosievefolder ++ +diff -Naur cyrus-imapd-2.4.4.orig/imap/lmtp_sieve.c cyrus-imapd-2.4.4/imap/lmtp_sieve.c +--- cyrus-imapd-2.4.4.orig/imap/lmtp_sieve.c 2010-11-11 23:15:33.000000000 +0100 ++++ cyrus-imapd-2.4.4/imap/lmtp_sieve.c 2010-11-15 10:40:13.127210740 +0100 +@@ -88,6 +88,9 @@ + struct auth_state *authstate; + } script_data_t; + ++static int autosieve_subfolder(char *userid, struct auth_state *auth_state, ++ char *subfolder, struct namespace *namespace); ++ + static char *make_sieve_db(const char *user) + { + static char buf[MAX_MAILBOX_PATH+1]; +@@ -496,7 +499,20 @@ + sd->username, mdata->notifyheader, + namebuf, quotaoverride, 0); + } +- ++ ++ if (ret == IMAP_MAILBOX_NONEXISTENT) { ++ /* if "plus" folder under INBOX, then try to create it */ ++ ret = autosieve_subfolder((char *) sd->username, sd->authstate, namebuf, mdata->namespace); ++ ++ /* Try to deliver the mail again. */ ++ if (!ret) ++ ret = deliver_mailbox(md->f, mdata->content, mdata->stage, md->size, ++ fc->imapflags->flag, fc->imapflags->nflags, ++ (char *) sd->username, sd->authstate, md->id, ++ sd->username, mdata->notifyheader, ++ namebuf, quotaoverride, 0); ++ } ++ + if (!ret) { + snmp_increment(SIEVE_FILEINTO, 1); + return SIEVE_OK; +@@ -947,3 +963,80 @@ + we'll do normal delivery */ + return r; + } ++ ++ ++#define SEP '|' ++ ++static int autosieve_subfolder(char *userid, struct auth_state *auth_state, ++ char *subfolder, struct namespace *namespace) ++{ ++ char option_name_external[MAX_MAILBOX_NAME + 1]; ++ char option_name_internal[MAX_MAILBOX_NAME + 1]; ++ const char *subf ; ++ char *p, *q, *next_subf; ++ int len, r = 0; ++ int createsievefolder = 0; ++ ++ /* Check if subfolder or userid are NULL */ ++ if(userid == NULL || subfolder == NULL) ++ return IMAP_MAILBOX_NONEXISTENT; ++ ++ syslog(LOG_DEBUG, "autosievefolder: autosieve_subfolder() was called for user %s, folder %s", ++ userid, subfolder); ++ ++ if (config_getswitch(IMAPOPT_ANYSIEVEFOLDER)) { ++ createsievefolder = 1; ++ } else if ((subf = config_getstring(IMAPOPT_AUTOSIEVEFOLDERS)) != NULL) { ++ /* Roll through subf */ ++ next_subf = (char *) subf; ++ while (*next_subf) { ++ for (p = next_subf ; isspace((int) *p) || *p == SEP ; p++); ++ for (next_subf = p ; *next_subf && *next_subf != SEP ; next_subf++); ++ for (q = next_subf ; q > p && (isspace((int) *q) || *q == SEP || !*q); q--); ++ ++ if (!*p) continue; ++ ++ len = q - p + 1; ++ /* ++ * This is a preliminary length check based on the assumption ++ * that the *final* internal format will be something ++ * like user.userid.subfolder(s). ++ */ ++ if (len > sizeof(option_name_external) - strlen(userid) - 5) ++ return IMAP_MAILBOX_BADNAME; ++ ++ strlcpy(option_name_external, namespace->prefix[NAMESPACE_INBOX], sizeof(option_name_external)); ++ strncat(option_name_external, p, len); ++ ++ /* ++ * Transform the option folder name to internal namespace and compare it ++ * with what must be created. ++ */ ++ r = namespace->mboxname_tointernal(namespace, option_name_external, userid, option_name_internal); ++ if (r) continue; ++ ++ if (!strcmp(option_name_internal, subfolder)) { ++ createsievefolder = 1; ++ break; ++ } ++ } ++ } ++ ++ if (createsievefolder) { ++ /* Folder is already in internal namespace format */ ++ r = mboxlist_createmailbox(subfolder, 0, NULL, ++ 1, userid, auth_state, 0, 0, 0); ++ if (!r) { ++ mboxlist_changesub(subfolder, userid, auth_state, 1, 1); ++ syslog(LOG_DEBUG, "autosievefolder: User %s, folder %s creation succeeded", ++ userid, subfolder); ++ return 0; ++ } else { ++ syslog(LOG_ERR, "autosievefolder: User %s, folder %s creation failed. %s", ++ userid, subfolder,error_message(r)); ++ return r; ++ } ++ } else ++ return IMAP_MAILBOX_NONEXISTENT; ++} ++ +diff -Naur cyrus-imapd-2.4.4.orig/lib/imapoptions cyrus-imapd-2.4.4/lib/imapoptions +--- cyrus-imapd-2.4.4.orig/lib/imapoptions 2010-11-11 23:15:33.000000000 +0100 ++++ cyrus-imapd-2.4.4/lib/imapoptions 2010-11-15 10:40:13.129220481 +0100 +@@ -1096,6 +1096,15 @@ + /* If enabled, lmtpd will look for Sieve scripts in user's home + directories: ~user/.sieve. */ + ++{ "anysievefolder", 0, SWITCH } ++/* It must be "yes" in order to permit the autocreation of any INBOX subfolder ++ requested by a sieve filter, through the "fileinto" action. (default = no) */ ++ ++{ "autosievefolders", NULL, STRING } ++/* It is a "|" separated list of subfolders of INBOX that will be automatically created, ++ if requested by a sieve filter, through the "fileinto" action. (default = null) ++ i.e. autosievefolders: Junk | Spam */ ++ + { "singleinstancestore", 1, SWITCH } + /* If enabled, imapd, lmtpd and nntpd attempt to only write one copy + of a message per partition and create hard links, resulting in a -- cgit v1.2.3