From ed16becd86f3dec0cc8690d69906b1ded52c1250 Mon Sep 17 00:00:00 2001
From: Robert Allen <slacker@engineer.com>
Date: Fri, 5 Sep 2014 22:51:11 +0700
Subject: office/taskd: Added (task server daemon).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>
---
 office/taskd/README                |  25 +++++
 office/taskd/README_SLACKWARE      | 192 +++++++++++++++++++++++++++++++++++++
 office/taskd/doinst.sh             |  28 ++++++
 office/taskd/profile/taskddata     |  13 +++
 office/taskd/profile/taskddata.csh |   4 +
 office/taskd/profile/taskddata.sh  |   4 +
 office/taskd/rc.taskd.diff         |  55 +++++++++++
 office/taskd/slack-desc            |  19 ++++
 office/taskd/taskd.SlackBuild      | 128 +++++++++++++++++++++++++
 office/taskd/taskd.info            |  10 ++
 10 files changed, 478 insertions(+)
 create mode 100644 office/taskd/README
 create mode 100644 office/taskd/README_SLACKWARE
 create mode 100644 office/taskd/doinst.sh
 create mode 100644 office/taskd/profile/taskddata
 create mode 100644 office/taskd/profile/taskddata.csh
 create mode 100644 office/taskd/profile/taskddata.sh
 create mode 100644 office/taskd/rc.taskd.diff
 create mode 100644 office/taskd/slack-desc
 create mode 100644 office/taskd/taskd.SlackBuild
 create mode 100644 office/taskd/taskd.info

(limited to 'office')

diff --git a/office/taskd/README b/office/taskd/README
new file mode 100644
index 0000000000..b65268f075
--- /dev/null
+++ b/office/taskd/README
@@ -0,0 +1,25 @@
+Taskwarrior is an open-source cross platform command-line 
+task management tool. It allows you to capture, annotate, 
+manipulate and present your tasks, then sync them among 
+devices. 
+
+The taskd server is the component which supports 
+synchronization among task clients.
+
+The task client application is also available on SBo.
+
+Each may be built and run standalone so that there are
+no hard buildtime or runtine dependencies between them.
+
+It is recommended to create a non-priv'd user to run the
+server, and it requires CA certs to operate, which may
+be generated with included scripts.
+
+Installation of this package provides a complete taskd
+install from upstream source. You may proceed to configure
+and operate it from the distribution documentation if you
+like.
+
+The additional README_SLACKWARE file provides notes for
+getting things configured and working quickly on a Slackware
+platform with a few extra pieces provided.
diff --git a/office/taskd/README_SLACKWARE b/office/taskd/README_SLACKWARE
new file mode 100644
index 0000000000..e912b7c1fe
--- /dev/null
+++ b/office/taskd/README_SLACKWARE
@@ -0,0 +1,192 @@
+*** Running a taskd server under Slackware ***
+
+Table of contents:
+	
+	* Taskd configuration for Slackware
+	* Creating a taskd user and data directory
+	* Initializing the server
+	* Certificates and clients
+	* Starting the server
+	* Cautions and quirks...
+
+See man taskd, /usr/doc/taskd-VERSION/doc/operation.txt
+and man task-sync (from task) for full details of
+what follows. In particular, read the operation.txt
+document for a more complete overview.
+
+Taskd configuration for Slackware
+=================================
+
+The taskd server is written to be cross-platform among
+Unix-like OSs and leaves many setup and configuration
+choices to the user. The provided man pages and text
+guides are complete and helpful, but this SlackBuild
+script adds a few details to make initial setup easier
+on a Slackware system.
+
+The added pieces are:
+
+	* Creation of a taskd user and group
+	* Creation of data directory - /var/lib/taskd
+	* A global path config file - /etc/taskddata
+	* Profile scripts - /etc/profile.d/taskddata.{sh,csh}
+	* A Slackware start script - /etc/rc.d/rc.taskd
+
+If you build and install the package with this script, you
+you will end with a complete taskd install just as provided
+by the upstream sources. Simply ignore or remove the above 
+listed files and skip the following config steps, and you
+may then configure and run the server according to your own
+choices based on man taskd and the distribution docs.
+
+If you continue, the following steps will get your taskd 
+server running quickly and safely based on the above 
+listed choices.
+
+Create a taskd user and data directory
+======================================
+
+The server should be run as a non-priviledged user, and
+the data paths should be owned by that user and not
+accessible by others. You may use any UID/GID you choose,
+those guaranteed not to conflict on a Slackware/SBo system
+may be found here: http://www.slackbuilds.org/uid_gid.txt
+
+To create the user account and data directory, execute the
+following shell commands as root:
+
+groupadd -g 290 taskd
+useradd -g taskd -u 290 -d /var/lib/taskd taskd 
+mkdir -p /var/lib/taskd
+chown taskd:taskd /var/lib/taskd
+chmod 700 /var/lib/taskd
+
+Initializing the server
+=======================
+
+You need to initialize the server as the taskd user,
+AND  the $TASKDDATA env variable must be set for that user,
+so let's verify that first:
+
+	su - taskd
+	echo $TASKDDATA
+
+If the value of $TASKDDATA is not the same as the data path
+set above, check the following:
+
+	/etc/taskddata - Must export the variable when sourced
+
+	/etc/profile.d/taskddata.{sh,csh} - are executable
+		OR
+	/etc/profile - includes a line ". /etc/taskddata"
+
+After you verify taskd user correctly sees $TASKDDATA...
+
+	taskd init --data $TASKDDATA
+	taskd config server localhost:53589
+
+Change logs and PIDs from /tmp to data path
+
+	taskd config log $TASKDDATA/taskd.log
+	taskd config pid.file $TASKDDATA/taskd.pid
+	taskd config ip.log   1
+
+We will allow all connections for now...
+
+	taskd config client.allow all
+	taskd config client.deny none
+
+Certificates and clients
+========================
+
+The server needs a certificate, key and crl to operate.
+See operation.txt and man taskd to set up your own certs,
+the following uses locally created self-signed certs.
+
+You will need to be root for this...
+
+      cd /usr/share/taskd-VERSION/pki
+      ./generate
+
+Once the various files are created, install them in $TASKDDATA:
+
+      cp client.cert.pem $TASKDDATA
+      cp server.cert.pem $TASKDDATA
+      cp server.key.pem $TASKDDATA
+      cp server.crl.pem $TASKDDATA
+
+Configure the server to use them:
+
+      taskd config client.cert $TASKDDATA/client.cert.pem
+      taskd config server.cert $TASKDDATA/server.cert.pem
+      taskd config server.key $TASKDDATA/server.key.pem
+      taskd config server.crl $TASKDDATA/server.crl.pem
+
+We are using self-signed certs at this point, so...
+
+      cp ca.cert.pem $TASKDDATA
+      taskd config ca.cert $TASKDDATA/ca.cert.pem
+
+Now you must change ownership of these to taskd in the data
+directory:
+
+	chown taskd:taskd /var/lib/taskd/*
+
+The resultant client.cert.pem and client.key.pem files 
+are needed by the clients (see man task-sync from task).
+
+This will get taskd working and is probably sufficient for local
+use. You will want to use proper certificates and keys created
+per-user for production use. See the accompanying docs for details.
+
+See man taskd for creating and managing organizations, groups and 
+users on the server.
+
+Starting the server
+===================
+
+To start/stop the taskd server:
+
+chmod +x /etc/rc.d/rc.taskd
+
+/etc/rc.d/rc.taskd start
+/etc/rc.d/rc.taskd stop
+
+See comments in /etc/rc.d/rc.taskd to auto-start at boot.
+
+Cautions and quirks...
+======================
+
+Taskd is a new application and is not as mature as the task
+client application. Although it has proven to be very stable in 
+operation, it has a few loose ends still when it comes to
+admin of the server. Hopefully these will be cleaned up with
+future releases!
+
+A recurring theme in my own use has been that when creating
+new organizations and users, I forget to su - taskd first and
+perform the operation as root - and it succeeds! But taskd
+creates the associated subdirectories and files with root
+ownership and the server cannot use them!
+
+Another is when changing server certs, I generate and copy
+them in as root - the server will not start afterward.
+
+The fix is easy in both cases...
+
+chown -R taskd:taskd /var/lib/taskd
+
+Just remember to perform all server admin as taskd, and when
+something breaks - check ownerships first!
+
+Another quirk is the start script - rc.taskd. I generated this
+based on the distribution taskdctl script, so I'll share the
+blame! It is not very robust when it encounters errors at startup
+and will report "server started" under some conditions where the
+server actually failed to start... use man taskd and test from
+an su - taskd shell when getting the configs right.
+
+Hopefully the server will catch the client soon in terms of
+polish!
+
+Enjoy!
diff --git a/office/taskd/doinst.sh b/office/taskd/doinst.sh
new file mode 100644
index 0000000000..c4ba0e205a
--- /dev/null
+++ b/office/taskd/doinst.sh
@@ -0,0 +1,28 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+preserve_perms etc/rc.d/rc.taskd.new
+preserve_perms etc/profile.d/taskddata.sh.new
+preserve_perms etc/profile.d/taskddata.csh.new
+preserve_perms etc/taskddata.new
diff --git a/office/taskd/profile/taskddata b/office/taskd/profile/taskddata
new file mode 100644
index 0000000000..870f819f67
--- /dev/null
+++ b/office/taskd/profile/taskddata
@@ -0,0 +1,13 @@
+#!/bin/sh
+#Global taskd data path config
+#Must be sourced into taskd and admin user environments
+#
+#You may add the following line to /etc/profile
+# . /etc/taskd_config
+# OR
+#chmod +x /etc/profile.d/taskddata.*
+
+TASKDDATA=/var/lib/taskd
+export TASKDDATA
+
+
diff --git a/office/taskd/profile/taskddata.csh b/office/taskd/profile/taskddata.csh
new file mode 100644
index 0000000000..c1a2e40049
--- /dev/null
+++ b/office/taskd/profile/taskddata.csh
@@ -0,0 +1,4 @@
+#!/bin/csh
+#Set data path for taskd server from global config
+
+source /etc/taskddata
diff --git a/office/taskd/profile/taskddata.sh b/office/taskd/profile/taskddata.sh
new file mode 100644
index 0000000000..f9b61cca0f
--- /dev/null
+++ b/office/taskd/profile/taskddata.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+#Set data path for taskd server from global config
+
+. /etc/taskddata
diff --git a/office/taskd/rc.taskd.diff b/office/taskd/rc.taskd.diff
new file mode 100644
index 0000000000..9cd4d59e41
--- /dev/null
+++ b/office/taskd/rc.taskd.diff
@@ -0,0 +1,55 @@
+--- src/taskdctl	2014-09-04 15:15:11.000000000 -0600
++++ rc.taskd	2014-09-05 00:58:33.000000000 -0600
+@@ -26,13 +26,49 @@
+ ##
+ ################################################################################
+ 
++################################################################################
++# SLACKWARE STARTUP:
++#
++# Before this script may be run the following conditions must be met:
++#
++#       A taskd user must exist
++#       The data path must exist and be owned by the taskd user
++#       The data path must be set in $TASKDDATA or in /etc/taskddata
++#       The server must have been previously initialized by
++#               taskd init --data $TASKDDATA
++#
++#       Additional configuration parameters must be valid and CA installed
++#
++#       See /usr/doc/taskd-VERSION/README_SLACKWARE and man taskd for details.
++#
++# To auto start taskd at boot add these lines to /etc/rc.d/rc.local
++# if [ -x /etc/rc.d/rc.taskd ]; then
++#       /etc/rc.d/rc.taskd start
++# fi
++#
++# To stop taskd at shutdown add these lines to /etc/rc.d/rc.local_shutdown
++# if [ -x /etc/rc.d/rc.taskd ]; then
++#        /etc/rc.d/rc.taskd stop
++# fi
++################################################################################
++
++#Initialize from global config for convenience - SlackBuild patch
++if [ -z $TASKDDATA ] && [ -f /etc/taskddata ] ; then
++	. /etc/taskddata
++fi
++
+ if [ -z $TASKDDATA ] ; then
+-  echo 'The TASKDDATA variable must be set.'
+-  exit
++	echo 'The TASKDDATA variable must be set.'
++	exit
+ fi
+ 
+ PIDFILE=$(taskd config --data $TASKDDATA | grep pid.file | awk '{print $2}')
+-DAEMON="taskd server --data $TASKDDATA --daemon"
++DAEMON="taskd_ctl $TASKDDATA"
++
++taskd_ctl(){
++	EX="taskd server --data $1 --daemon"
++	su - taskd -c "$EX"
++}
+ 
+ ERROR=0
+ ARGV="$@"
diff --git a/office/taskd/slack-desc b/office/taskd/slack-desc
new file mode 100644
index 0000000000..03eed32ded
--- /dev/null
+++ b/office/taskd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+     |-----handy-ruler------------------------------------------------------|
+taskd: taskd (task server daemon)
+taskd:
+taskd: Taskwarrior is an open-source command-line task management tool.
+taskd: It allows you to capture, annotate, manipulate and present tasks.  
+taskd:
+taskd: taskd is an extension supporting client synchronization.
+taskd:
+taskd:
+taskd:
+taskd: Project home page - http://taskwarrior.org/
+taskd:
diff --git a/office/taskd/taskd.SlackBuild b/office/taskd/taskd.SlackBuild
new file mode 100644
index 0000000000..f137a52139
--- /dev/null
+++ b/office/taskd/taskd.SlackBuild
@@ -0,0 +1,128 @@
+#!/bin/sh
+
+# Slackware build script for taskd
+
+# Copyright 2014 Robert Allen
+# All rights reserved, including Creator Endowed Unalienable Rights
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=taskd
+VERSION=${VERSION:-1.0.0}
+BUILD=${BUILD:-3}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+
+#Patch to use global path config and add startup comments for rc.taskd
+patch -p0 <$CWD/rc.taskd.diff
+
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+
+mkdir -p build
+  cmake \
+    -DCMAKE_C_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_CXX_FLAGS:STRING="$SLKCFLAGS" \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DTASKD_BINDIR=bin \
+    -DTASKD_EXTDIR=libexec/taskd \
+    -DTASKD_DOCDIR=doc/$PRGNAM-$VERSION \
+    -DTASKD_MAN1DIR=man/man1 \
+    -DTASKD_MAN5DIR=man/man5 \
+    -DLIB_SUFFIX=${LIBDIRSUFFIX}
+
+  make
+  make install DESTDIR=$PKG
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/etc/rc.d
+mv $PKG/usr/bin/taskdctl $PKG/etc/rc.d/rc.taskd.new
+chmod 644 $PKG/etc/rc.d/rc.taskd.new
+
+mkdir -p $PKG/etc/profile.d
+cat $CWD/profile/taskddata > $PKG/etc/taskddata.new
+cat $CWD/profile/taskddata.sh > $PKG/etc/profile.d/taskddata.sh.new
+cat $CWD/profile/taskddata.csh > $PKG/etc/profile.d/taskddata.csh.new
+chmod 755 $PKG/etc/profile.d/*new
+chmod 644 $PKG/etc/taskddata.new
+
+# Compress man pages
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+#Additional documents...
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION/doc
+cp -a doc/[a-z]*.txt $PKG/usr/doc/$PRGNAM-$VERSION/doc/.
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+cat $CWD/README > $PKG/usr/doc/$PRGNAM-$VERSION/README
+cat $CWD/README_SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README_SLACKWARE
+
+#CA keys are required, pki provides tools for the task, and extra scripts
+mkdir -p $PKG/usr/share/$PRGNAM-$VERSION
+cp -ra pki $PKG/usr/share/$PRGNAM-$VERSION/.
+cp -ra scripts $PKG/usr/share/$PRGNAM-$VERSION/.
+cp -ra mon $PKG/usr/share/$PRGNAM-$VERSION/.
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/office/taskd/taskd.info b/office/taskd/taskd.info
new file mode 100644
index 0000000000..6e6c35386d
--- /dev/null
+++ b/office/taskd/taskd.info
@@ -0,0 +1,10 @@
+PRGNAM="taskd"
+VERSION="1.0.0"
+HOMEPAGE="http://taskwarrior.org"
+DOWNLOAD="http://taskwarrior.org/download/taskd-1.0.0.tar.gz"
+DOWNLOAD_x86_64=""
+MD5SUM="1cead23539e36d5623cb3ca1225072c0"
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Robert Allen"
+EMAIL="slacker@engineer.com"
-- 
cgit v1.2.3