system/xen: Removed (needs update)

This will be updated by the maintainer after 13.37 releases,
but he's not done with the needed changes yet...

Signed-off-by: Robby Workman <rworkman@slackbuilds.org>

3 files changed, 0 insertions, 143 deletions

diff --git a/system/xen/domU/README.domU b/system/xen/domU/README.domU
deleted file mode 100644
index f060dceece..0000000000
--- a/system/xen/domU/README.domU
+++ /dev/null
@@ -1,57 +0,0 @@
-		HOW TO INSTALL A SLACKWARE DOMU XEN GUEST
-
-After the ordeal of installing and configuring LILO/GRUB, Xen, kernel-xen
-and possibly also a new initrd, editing /etc/rc.d/rc.local and 
-/etc/rc.d/rc.local_shutdown, and finally booting on your Slackware XenLinux,
-you might be wondering how are you to load you guest OS. If you look around,
-you might find Xen domU (unprivileged) guest that you can download from the
-Internet, but some of us might want to roll their own. This MINI-HOWTO shows
-how to install a Slackware domU guest. The fastest way is to mount your
-Slackware DVD on /media/SlackDVD, normally this is the mount point chosen by
-HAL. Then run the included domU.sh script. 
-
-# ./domU.sh
-
-This will install Slackware onto an 8GB file called slackware.img and a 500MB 
-swap file called swap_file. By default, a typical server installation ensues.
-
-Have a good look at the mydom file as you need to fill in the full path to the
-slackware.img and swap_file files.
-
-Then run the following command:
-
-# xm create -c mydom
-
-Your Slackware XenLinux domU should boot instantly.
-
-Since Xen domU support has been in mainline kernel for a while now, those that
-wish to have the best performance can compile a seperate domU kernel based on a
-stock Slackware kernel config.
-This is what you have to select/unselect when building domU only kernel:
-
----
-Processor type and features  --->
-  [*] Paravirtualized guest support  --->
-    [*]   Xen guest support
-
-Bus options (PCI etc.)  --->
-  [ ] PCI support
-
-Device Drivers  --->
-  < > Serial ATA and Parallel ATA drivers  --->
-  SCSI device support  --->
-    < > SCSI device support
----
-
-Disabling SCSI support frees up the /dev/sd* device names for use as Xen
-virtual block devices. Basicly, this changes their names from /dev/sd* to a
-Xen device name format /dev/xvd*. If this is left enabled, ocasionaly domU can
-get stuck in a reboot-loop, with this error:
-"XENBUS: Waiting for devices to initialise..."
-Naturaly, to get the best performance you can disable everything that you
-don't need in domU kernel.
-
-Note that these files are not intended for a production environment. Users who
-have particular requirements will need to set up their own methods, but these
-files might provide a good starting point. Refer to the Xen manual and 
-http://xen.org for more details and options.
diff --git a/system/xen/domU/domU.sh b/system/xen/domU/domU.sh
deleted file mode 100644
index d9b2792917..0000000000
--- a/system/xen/domU/domU.sh
+++ /dev/null
@@ -1,76 +0,0 @@
-#!/bin/sh
-# This Script builds a Slackware domU Xen Guest on a Slackware host,
-# Although it might work correctly, this script is intended as a template, so
-# simplicity is the priority here.
-# Chris Abela <chris.abela@maltats.com>
-# 20100308
-# Updated by mario <mario@slackverse.org>
-# 20100904
-
-set -e
-
-# Build an image for the root file system and another for the swap
-# Default values : 8GB and 500MB resepectively.
-ROOT_MB=${ROOT_MB:-8000}
-SWAP_MB=${SWAP_MB:-500}
-dd if=/dev/zero of=slackware.img bs=1M count=0 seek=$ROOT_MB
-mkfs.ext4 -F slackware.img
-dd if=/dev/zero of=swap_file bs=1M count=0 seek=$SWAP_MB
-mkswap swap_file
-
-# Make a mountpoint for the root file system and mount it
-mkdir -p mnt
-mount -o loop slackware.img mnt
-
-# Make a mountpoint for proc and mount it
-mkdir -p mnt/proc
-mount --bind /proc mnt/proc
-
-##############################################################################
-#									     #
-# IMPORTANT : This assumes that you have mounted your Slackware DVD on	     #
-#		/media/SlackDVD						     #
-#									     #
-##############################################################################
-
-# This will install a "Server" with the listed packages
-for i in a ap d e f k l n t tcl; do
-  installpkg --root mnt/ /media/SlackDVD/slackware*/$i/*.t?z
-done
-chroot mnt /sbin/ldconfig
-
-# create fstab
-cat >mnt/etc/fstab <<EOF
-/dev/xvda2       swap             swap        defaults         0   0
-/dev/xvda1       /                ext4        defaults         1   1
-#/dev/cdrom      /mnt/cdrom       auto        noauto,owner,ro  0   0
-/dev/fd0         /mnt/floppy      auto        noauto,owner     0   0
-devpts           /dev/pts         devpts      gid=5,mode=620   0   0
-proc             /proc            proc        defaults         0   0
-tmpfs            /dev/shm         tmpfs       defaults         0   0
-EOF
-
-chroot mnt /usr/sbin/timeconfig		# Set the time
-chroot mnt /sbin/netconfig		# Set the network
-chroot mnt /usr/bin/passwd		# Set root's password
-
-# Before we could use xencons=tty and leave inittab and securetty files intact,
-# but that stopped working with new xen, so we fix it by adding hvc0.
-sed 's/^\(c[1-6]:123\)/#\1/' /etc/inittab
-echo -e '\nc1:1235:respawn:/sbin/agetty 38400 hvc0 linux' >> /etc/inittab
-echo -e '\nhvc0' >> /etc/securetty
-
-# This will save us an alarming (yet harmless) warning
-(cd mnt/lib/modules
-  if [ -d 2.6.33.4-smp ] ;then
-    # for Slack32
-    ln -s 2.6.33.4-smp 2.6.33.4-xen
-    else
-    # for Slack64
-    ln -s 2.6.33.4 2.6.33.4-xen
-  fi
-)
-
-# unmount proc and the filesystem
-umount mnt/proc
-umount mnt
diff --git a/system/xen/domU/mydom b/system/xen/domU/mydom
deleted file mode 100644
index 0ac1ad69d7..0000000000
--- a/system/xen/domU/mydom
+++ /dev/null
@@ -1,10 +0,0 @@
-kernel = "/boot/vmlinuz-xen"
-ramdisk = "/boot/initrd-xen.gz"
-memory = 128
-name = "slackware"
-vif = [ 'mac=00:16:3e:00:00:01']
-disk = [ 'file:/full_path_to/slackware.img,xvda1,w',
-	 'file:/full_path_to/swap_file,xvda2,w' ]
-root = "/dev/xvda1 ro"
-extra = "3"
-extra = "console=hvc0 elevator=noop"