5 files changed, 0 insertions, 280 deletions
diff --git a/development/gcc-d/README b/development/gcc-d/README
deleted file mode 100644
index 09bb108754..0000000000
--- a/development/gcc-d/README
+++ /dev/null
@@ -1,12 +0,0 @@
-This is GDC (GNU D Compiler), the D frontend for GCC.
-
-D is a general-purpose programming language with static typing,
-systems-level access, and C-like syntax. With the D Programming
-Language, write fast, read fast, and run fast.
-
-This package provides GCC 8 with C, C++ and D. It doesn't conflict with
-GCC 5 shipped by Slackware.
-
-Since GCC is built several times to bootstrap the D frontend written in
-D with an older C++-version, be sure you have about 9 GB of disk space
-in your temporary directory.
diff --git a/development/gcc-d/doinst.sh b/development/gcc-d/doinst.sh
deleted file mode 100644
index e9f46fc9c5..0000000000
--- a/development/gcc-d/doinst.sh
+++ /dev/null
@@ -1,3 +0,0 @@
-if [ -x /usr/bin/install-info ]; then
-  chroot . /usr/bin/install-info --info-dir=/usr/info /usr/info/gdc.info.gz 2> /dev/null
-fi
diff --git a/development/gcc-d/gcc-d.SlackBuild b/development/gcc-d/gcc-d.SlackBuild
deleted file mode 100644
index 3bfad9d03f..0000000000
--- a/development/gcc-d/gcc-d.SlackBuild
+++ /dev/null
@@ -1,230 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for gcc-d
-
-# Copyright 2017-2018 Eugene Wissner, Dachau, Germany
-#
-# Based on the GCC build script by Patrick J. Volkerding, Sebeka, MN, USA
-#
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=gcc-d
-VERSION=${VERSION:-2.081.2}
-GCC_VERSION=8.2.0
-HOST_GDC=2.076.0
-HOST_GCC=7.3.0
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$(uname -m)" in
-    i?86) ARCH=i586 ;;
-    arm*) readelf /usr/bin/file -A | egrep -q "Tag_CPU.*[4,5]" && ARCH=arm || ARCH=armv7hl ;;
-    *) ARCH=$(uname -m) ;;
-  esac
-  export ARCH
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i586" ]; then
-  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
-  LIBDIRSUFFIX=""
-  LIB_ARCH=i386
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-  LIB_ARCH=i386
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-  LIB_ARCH=amd64
-elif [ "$ARCH" = "armv7hl" ]; then
-  SLKCFLAGS="-O3 -march=armv7-a -mfpu=vfpv3-d16"
-  LIBDIRSUFFIX=""
-  LIB_ARCH=armv7hl
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-  LIB_ARCH=$ARCH
-fi
-
-case "$ARCH" in
-  arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
-  *)    TARGET=$ARCH-slackware-linux ;;
-esac
-
-if [ "$ARCH" != "x86_64" ]; then
-  GCC_ARCHOPTS="--with-arch=$ARCH"
-else
-  GCC_ARCHOPTS="--disable-multilib"
-fi
-MAJOR=$( echo $GCC_VERSION | cut -d. -f1 )
-
-set -e
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-
-# Build bootstrap compiler
-cd $TMP
-rm -rf gdc-$HOST_GDC gcc-$HOST_GCC $TMP/bootstrap-gcc-d
-tar xvf $CWD/gcc-$HOST_GCC.tar.?z*
-tar xvf $CWD/gdc-$HOST_GDC.tar.?z*
-
-# Apply patches.
-cd $TMP/gcc-$HOST_GCC/gcc
-
-cd $TMP/gdc-$HOST_GDC
-sh setup-gcc.sh ../gcc-$HOST_GCC
-
-cd $TMP/gcc-$HOST_GCC
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-../gcc-$HOST_GCC/configure \
-  --prefix=$TMP/bootstrap-$PRGNAM \
-  --enable-shared \
-  --disable-bootstrap \
-  --enable-languages=c,c++,d \
-  --enable-threads=posix \
-  --enable-checking=release \
-  --with-system-zlib \
-  --enable-libstdcxx-dual-abi \
-  --disable-libunwind-exceptions \
-  --enable-__cxa_atexit \
-  --enable-libssp \
-  --enable-lto \
-  --disable-install-libiberty \
-  --with-gnu-ld \
-  --verbose \
-  --with-arch-directory=$LIB_ARCH \
-  $GCC_ARCHOPTS \
-  --target=${TARGET} \
-  --build=${TARGET} \
-  --host=${TARGET}
-
-make
-make install
-
-# Build D compiler
-cd $TMP
-rm -rf gdc-$VERSION gcc-$GCC_VERSION
-tar xvf $CWD/gcc-$GCC_VERSION.tar.?z*
-tar xvf $CWD/gdc-$VERSION.tar.?z*
-
-# Apply patches.
-cd $TMP/gcc-$GCC_VERSION/gcc
-
-cd $TMP/gdc-$VERSION
-sh setup-gcc.sh ../gcc-$GCC_VERSION
-
-cd $TMP/gcc-$GCC_VERSION
-chown -R root:root .
-find -L . \
- \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-CC="$TMP/bootstrap-$PRGNAM/bin/gcc" \
-CXX="$TMP/bootstrap-$PRGNAM/bin/g++" \
-CPP="$TMP/bootstrap-$PRGNAM/bin/cpp" \
-GDC="$TMP/bootstrap-$PRGNAM/bin/gdc" \
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-../gcc-$GCC_VERSION/configure \
-  --prefix=/opt/gdc \
-  --libdir=/opt/gdc/lib$LIBDIRSUFFIX \
-  --mandir=/usr/man \
-  --infodir=/usr/info \
-  --enable-shared \
-  --enable-bootstrap \
-  --enable-languages=c,c++,d \
-  --enable-threads=posix \
-  --enable-checking=release \
-  --with-system-zlib \
-  --enable-libstdcxx-dual-abi \
-  --disable-libunwind-exceptions \
-  --enable-__cxa_atexit \
-  --enable-libssp \
-  --enable-lto \
-  --disable-install-libiberty \
-  --with-gnu-ld \
-  --verbose \
-  --with-arch-directory=$LIB_ARCH \
-  --program-suffix="-$MAJOR" \
-  --with-pkgversion="GDC $VERSION" \
-  $GCC_ARCHOPTS \
-  --target=${TARGET} \
-  --build=${TARGET} \
-  --host=${TARGET}
-
-make
-make install DESTDIR=$PKG
-
-# Remove not D related stuff, already available in GCC
-find $PKG/usr/info -type f -not -name "*gdc*" -delete
-rm -r $PKG/usr/man/man7
-#rm -r $PKG/usr/share
-#rm -r $PKG/usr/include
-
-#find $PKG/usr/libexec/gcc \
-#  \( -type f -or -type l \) -not -name "cc1d" \
-#  -delete
-
-#find $PKG/usr/lib$LIBDIRSUFFIX/gcc -mindepth 3 \
-#  \( -type f -or -type l \) -not -regex ".*/d/.*" \
-#  -delete
-
-#find $PKG/usr/lib$LIBDIRSUFFIX -maxdepth 1 \
-#  \( -type f -or -type l \)  \
-#  -not \( -name "*phobos*" -or -name "*gdruntime*" \) \
-#  -delete
-
-#find $PKG/usr -type d -empty -delete
-
-find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-mkdir -p $PKG/usr/bin
-for bin in $PKG/opt/gdc/bin/g* $PKG/opt/gdc/bin/c*; do
-  binary=$( basename $bin )
-  ln -s /opt/gdc/bin/$binary $PKG/usr/bin/$binary
-done
-ln -s gdc-$MAJOR $PKG/usr/bin/gdc
-
-find $PKG/usr/man -type f -exec gzip -9 {} \;
-for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-
-gzip -9 $PKG/usr/info/*.info
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp $TMP/gdc-$VERSION/README.md $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-
-mkdir -p $PKG/install
-cat $CWD/slack-desc > $PKG/install/slack-desc
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/development/gcc-d/gcc-d.info b/development/gcc-d/gcc-d.info
deleted file mode 100644
index 2471cac7b8..0000000000
--- a/development/gcc-d/gcc-d.info
+++ /dev/null
@@ -1,16 +0,0 @@
-PRGNAM="gcc-d"
-VERSION="2.081.2"
-HOMEPAGE="https://www.gdcproject.org/"
-DOWNLOAD="https://download.dlackware.com/hosted-sources/gcc-d/gdc-2.076.0.tar.xz \
-          https://download.dlackware.com/hosted-sources/gcc-d/gdc-2.081.2.tar.xz \
-          https://ftp.mirrorservice.org/sites/sourceware.org/pub/gcc/releases/gcc-7.3.0/gcc-7.3.0.tar.xz \
-          https://ftp.mirrorservice.org/sites/sourceware.org/pub/gcc/releases/gcc-8.2.0/gcc-8.2.0.tar.xz"
-MD5SUM="7cfaa5b332372c6cc91284bb63609f87 \
-        a0a1093b7a5774eb2a63313f3c0b6c28 \
-        be2da21680f27624f3a87055c4ba5af2 \
-        4ab282f414676496483b3e1793d07862"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES=""
-MAINTAINER="Eugene Wissner"
-EMAIL="belka@caraus.de"
diff --git a/development/gcc-d/slack-desc b/development/gcc-d/slack-desc
deleted file mode 100644
index f76a2186ea..0000000000
--- a/development/gcc-d/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-     |-----handy-ruler------------------------------------------------------|
-gcc-d: gcc-d (D support for GCC)
-gcc-d:
-gcc-d: GCC is the GNU Compiler Collection.
-gcc-d:
-gcc-d: D is a general-purpose programming language with static typing,
-gcc-d: systems-level access, and C-like syntax. With the D Programming
-gcc-d: Language, write fast, read fast, and run fast.
-gcc-d:
-gcc-d: Homepage: https://www.gdcproject.org
-gcc-d:
-gcc-d: