diff options
Diffstat (limited to 'network/tor')
| -rw-r--r-- | network/tor/torrc | 140 |
1 files changed, 88 insertions, 52 deletions
diff --git a/network/tor/torrc b/network/tor/torrc index 83d5bf22b4..d1ada4682d 100644 --- a/network/tor/torrc +++ b/network/tor/torrc @@ -1,32 +1,35 @@ ## Configuration file for a typical Tor user -## Last updated 16 July 2009 for Tor 0.2.2.1-alpha. -## (May or may not work for much older or much newer versions of Tor.) +## Last updated 22 September 2015 for Tor 0.2.7.3-alpha. +## (may or may not work for much older or much newer versions of Tor.) ## ## Lines that begin with "## " try to explain what's going on. Lines ## that begin with just "#" are disabled commands: you can enable them ## by removing the "#" symbol. ## -## See 'man tor', or https://www.torproject.org/tor-manual.html, +## See 'man tor', or https://www.torproject.org/docs/tor-manual.html, ## for more options you can use in this file. ## ## Tor will look for this file in various places based on your platform: -## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#torrc +## https://www.torproject.org/docs/faq#torrc ## ## This is a custom Slackware torrc. The original Tor Project torrc file is -## still available as /etc/torrc/torrc.sample +## still available as /etc/tor/torrc.sample - -## Replace this with "SocksPort 0" if you plan to run Tor only as a -## relay, and not make any local application connections yourself. -SocksPort 9050 # what port to open for local application connections -SocksListenAddress 127.0.0.1 # accept connections only from localhost -#SocksListenAddress 192.168.0.1:9100 # listen on this IP:port also +## Tor opens a SOCKS proxy on port 9050 by default -- even if you don't +## configure one below. Set "SOCKSPort 0" if you plan to run Tor only +## as a relay, and not make any local application connections yourself. +#SOCKSPort 9050 # Default: Bind to localhost:9050 for local connections. +SOCKSPort 127.0.0.1:9050 # what port to open for local application connections +#SOCKSPort 192.168.0.1:9100 # Bind to this address:port too. ## Entry policies to allow/deny SOCKS requests based on IP address. -## First entry that matches wins. If no SocksPolicy is set, we accept -## all (and only) requests from SocksListenAddress. -#SocksPolicy accept 192.168.0.0/16 -#SocksPolicy reject * +## First entry that matches wins. If no SOCKSPolicy is set, we accept +## all (and only) requests that reach a SOCKSPort. Untrusted users who +## can access your SOCKSPort may be able to learn about the connections +## you make. +#SOCKSPolicy accept 192.168.0.0/16 +#SOCKSPolicy accept6 FC00::/7 +#SOCKSPolicy reject * ## Logs go to stdout at level "notice" unless redirected by something ## else, like one of the below lines. You can have as many Log lines as @@ -35,7 +38,6 @@ SocksListenAddress 127.0.0.1 # accept connections only from localhost ## We advise using "notice" in most cases, since anything more verbose ## may provide sensitive information to an attacker who obtains the logs. ## - ## Send all messages of level 'notice' or higher to /var/log/tor/tor.log Log notice file /var/log/tor/tor.log ## Send every possible message to /var/log/tor/debug.log @@ -91,53 +93,67 @@ PidFile /var/run/tor/tor.pid ## Required: what port to advertise for incoming Tor connections. #ORPort 9001 -## If you want to listen on a port other than the one advertised -## in ORPort (e.g. to advertise 443 but bind to 9090), uncomment the -## line below too. You'll need to do ipchains or other port forwarding +## If you want to listen on a port other than the one advertised in +## ORPort (e.g. to advertise 443 but bind to 9090), you can do it as +## follows. You'll need to do ipchains or other port forwarding ## yourself to make this work. -#ORListenAddress 0.0.0.0:9090 +#ORPort 443 NoListen +#ORPort 127.0.0.1:9090 NoAdvertise + +## The IP address or full DNS name for incoming connections to your +## relay. Leave commented out and Tor will guess. +#Address noname.example.com + +## If you have multiple network interfaces, you can specify one for +## outgoing traffic to use. +# OutboundBindAddress 10.0.0.5 ## A handle for your relay, so people don't have to refer to it by key. +## Nicknames must be between 1 and 19 characters inclusive, and must +## contain only the characters [a-zA-Z0-9]. #Nickname ididnteditheconfig -## The IP address or full DNS name for your relay. Leave commented out -## and Tor will guess. -#Address noname.example.com - ## Define these to limit how much relayed traffic you will allow. Your ## own traffic is still unthrottled. Note that RelayBandwidthRate must -## be at least 20 KB. -#RelayBandwidthRate 100 KB # Throttle traffic to 100KB/s (800Kbps) -#RelayBandwidthBurst 200 KB # But allow bursts up to 200KB/s (1600Kbps) +## be at least 75 kilobytes per second. +## Note that units for these config options are bytes (per second), not +## bits (per second), and that prefixes are binary prefixes, i.e. 2^10, +## 2^20, etc. +#RelayBandwidthRate 100 KBytes # Throttle traffic to 100KB/s (800Kbps) +#RelayBandwidthBurst 200 KBytes # But allow bursts up to 200KB (1600Kb) ## Use these to restrict the maximum traffic per day, week, or month. -## Note that this threshold applies to sent _and_ to received bytes, -## not to their sum: Setting "4 GB" may allow up to 8 GB -## total before hibernating. +## Note that this threshold applies separately to sent and received bytes, +## not to their sum: setting "40 GB" may allow up to 80 GB total before +## hibernating. ## -## Set a maximum of 4 gigabytes each way per period. -#AccountingMax 4 GB +## Set a maximum of 40 gigabytes each way per period. +#AccountingMax 40 GBytes ## Each period starts daily at midnight (AccountingMax is per day) #AccountingStart day 00:00 ## Each period starts on the 3rd of the month at 15:00 (AccountingMax ## is per month) #AccountingStart month 3 15:00 -## Contact info to be published in the directory, so we can contact you -## if your relay is misconfigured or something else goes wrong. Google -## indexes this, so spammers might also collect it. +## Administrative contact information for this relay or bridge. This line +## can be used to contact you if your relay or bridge is misconfigured or +## something else goes wrong. Note that we archive and publish all +## descriptors containing these lines and that Google indexes them, so +## spammers might also collect them. You may want to obscure the fact that +## it's an email address and/or generate a new address for this purpose. #ContactInfo Random Person <nobody AT example dot com> ## You might also include your PGP or GPG fingerprint if you have one: -#ContactInfo 1234D/FFFFFFFF Random Person <nobody AT example dot com> +#ContactInfo 0xFFFFFFFF Random Person <nobody AT example dot com> ## Uncomment this to mirror directory information for others. Please do ## if you have enough bandwidth. #DirPort 9030 # what port to advertise for directory connections -## If you want to listen on a port other than the one advertised -## in DirPort (e.g. to advertise 80 but bind to 9091), uncomment the line -## below too. You'll need to do ipchains or other port forwarding yourself -## to make this work. -#DirListenAddress 0.0.0.0:9091 +## If you want to listen on a port other than the one advertised in +## DirPort (e.g. to advertise 80 but bind to 9091), you can do it as +## follows. below too. You'll need to do ipchains or other port +## forwarding yourself to make this work. +#DirPort 80 NoListen +#DirPort 127.0.0.1:9091 NoAdvertise ## Uncomment to return an arbitrary blob of html on your DirPort. Now you ## can explain what Tor is if anybody wonders why your IP address is ## contacting them. See contrib/tor-exit-notice.html in Tor's source @@ -148,14 +164,22 @@ PidFile /var/run/tor/tor.pid ## key fingerprint of each Tor relay you control, even if they're on ## different networks. You declare it here so Tor clients can avoid ## using more than one of your relays in a single circuit. See -## https://wiki.torproject.org/noreply/TheOnionRouter/TorFAQ#MultipleServers +## https://www.torproject.org/docs/faq#MultipleRelays +## However, you should never include a bridge's fingerprint here, as it would +## break its concealability and potentially reveal its IP/TCP address. #MyFamily $keyid,$keyid,... ## A comma-separated list of exit policies. They're considered first -## to last, and the first match wins. If you want to _replace_ -## the default exit policy, end this with either a reject *:* or an -## accept *:*. Otherwise, you're _augmenting_ (prepending to) the -## default exit policy. Leave commented to just use the default, which is +## to last, and the first match wins. +## +## If you want to allow the same ports on IPv4 and IPv6, write your rules +## using accept/reject *. If you want to allow different ports on IPv4 and +## IPv6, write your IPv6 rules using accept6/reject6 *6, and your IPv4 rules +## using accept/reject *4. +## +## If you want to _replace_ the default exit policy, end this with either a +## reject *:* or an accept *:*. Otherwise, you're _augmenting_ (prepending to) +## the default exit policy. Leave commented to just use the default, which is ## described in the man page or at ## https://www.torproject.org/documentation.html ## @@ -166,16 +190,28 @@ PidFile /var/run/tor/tor.pid ## you should update your exit policy to reflect this -- otherwise Tor ## users will be told that those destinations are down. ## -#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports but no more -#ExitPolicy accept *:119 # accept nntp as well as default exit policy +## For security, by default Tor rejects connections to private (local) +## networks, including to the configured primary public IPv4 and IPv6 addresses, +## and any public IPv4 and IPv6 addresses on any interface on the relay. +## See the man page entry for ExitPolicyRejectPrivate if you want to allow +## "exit enclaving". +## +#ExitPolicy accept *:6660-6667,reject *:* # allow irc ports on IPv4 and IPv6 but no more +#ExitPolicy accept *:119 # accept nntp ports on IPv4 and IPv6 as well as default exit policy +#ExitPolicy accept *4:119 # accept nntp ports on IPv4 only as well as default exit policy +#ExitPolicy accept6 *6:119 # accept nntp ports on IPv6 only as well as default exit policy #ExitPolicy reject *:* # no exits allowed -# + ## Bridge relays (or "bridges") are Tor relays that aren't listed in the -## main directory. Since there is no complete public list of them, even if an -## ISP is filtering connections to all the known Tor relays, they probably +## main directory. Since there is no complete public list of them, even an +## ISP that filters connections to all the known Tor relays probably ## won't be able to block all the bridges. Also, websites won't treat you ## differently because they won't know you're running Tor. If you can ## be a real relay, please do; but if not, be a bridge! #BridgeRelay 1 -#ExitPolicy reject *:* +## By default, Tor will advertise your bridge to users through various +## mechanisms like https://bridges.torproject.org/. If you want to run +## a private bridge, for example because you'll give out your bridge +## address manually to your friends, uncomment this line: +#PublishServerDescriptor 0 |