From 44889319aa503ac6a4784997e4d77b2f96ed0efc Mon Sep 17 00:00:00 2001 From: Aaditya Bagga Date: Sun, 26 Feb 2017 13:08:39 +0700 Subject: system/thermald: Added (Linux Thermal Daemon). Signed-off-by: Willy Sudiarto Raharjo --- system/thermald/README | 16 ++++++ system/thermald/README.Slackware | 14 +++++ system/thermald/doinst.sh | 15 +++++ system/thermald/slack-desc | 19 +++++++ system/thermald/thermald.SlackBuild | 108 ++++++++++++++++++++++++++++++++++++ system/thermald/thermald.info | 10 ++++ 6 files changed, 182 insertions(+) create mode 100644 system/thermald/README create mode 100644 system/thermald/README.Slackware create mode 100644 system/thermald/doinst.sh create mode 100644 system/thermald/slack-desc create mode 100644 system/thermald/thermald.SlackBuild create mode 100644 system/thermald/thermald.info (limited to 'system') diff --git a/system/thermald/README b/system/thermald/README new file mode 100644 index 0000000000..6326501691 --- /dev/null +++ b/system/thermald/README @@ -0,0 +1,16 @@ +The Linux Thermal Daemon program from 01.org + +Thermald deals with thermal issues for intel processor families +codenamed intel sandy-bridge and above. It is a Linux daemon +used to prevent the overheating of systems. This daemon monitors +temperature and applies compensation using available cooling methods. + +Prefers kernel with: + Intel RAPL power capping driver : Available from Linux kernel 3.13.rc1 + Intel P State driver (Available in Linux kernel stable release) + Intel Power clamp driver (Available in Linux kernel stable release) + + CONFIG_X86_MSR, so that x86 MSR can be read/write from user space + to control RAPL if no RAPL powecap class driver is not present. + + If none of the above is available uses cpufreq to control P states. diff --git a/system/thermald/README.Slackware b/system/thermald/README.Slackware new file mode 100644 index 0000000000..9b4624d644 --- /dev/null +++ b/system/thermald/README.Slackware @@ -0,0 +1,14 @@ +Since this is a daemon, it can be started at boot via /etc/rc.d/rc.local: + /usr/sbin/thermald + +It might be necessary to create /var/run/thermald/ first (depending on your +local system setup) + +An entry could be added to /etc/rc.d/rc.local_shutdown as well: + killall thermald + +CONFIG_X86_MSR is listed as an (optional) dependency, msr-tools +can be installed (https://slackbuilds.org/repository/14.2/system/msr-tools/) + +Uptill version 1.5.4 this was present as thermal_daemon on SBo. +To upgrade please remove thermal_daemon and install thermald. diff --git a/system/thermald/doinst.sh b/system/thermald/doinst.sh new file mode 100644 index 0000000000..120570687d --- /dev/null +++ b/system/thermald/doinst.sh @@ -0,0 +1,15 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + # If there's no config file by that name, mv it over: + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + # toss the redundant copy + rm $NEW + fi + # Otherwise, we leave the .new copy for the admin to consider... +} + +config etc/thermald/thermal-conf.xml.new +config etc/thermald/thermal-cpu-cdev-order.xml.new diff --git a/system/thermald/slack-desc b/system/thermald/slack-desc new file mode 100644 index 0000000000..e7d23cc482 --- /dev/null +++ b/system/thermald/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. +# Line up the first '|' above the ':' following the base package name, and +# the '|' on the right side marks the last column you can put a character in. +# You must make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +thermald: thermald (Linux Thermal Daemon) +thermald: +thermald: Thermald is a Linux daemon used to prevent system overheating. +thermald: This daemon monitors temperature and applies compensation using +thermald: available cooling methods. +thermald: +thermald: Project URL: https://github.com/01org/thermal_daemon +thermald: +thermald: +thermald: +thermald: diff --git a/system/thermald/thermald.SlackBuild b/system/thermald/thermald.SlackBuild new file mode 100644 index 0000000000..25410964d8 --- /dev/null +++ b/system/thermald/thermald.SlackBuild @@ -0,0 +1,108 @@ +#!/bin/sh + +# Slackware build script for thermald + +# Copyright 2017 Aaditya Bagga +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=thermald +SRCNAM=thermal_daemon +VERSION=${VERSION:-1.5.4} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i586 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $SRCNAM-$VERSION +tar xvf $CWD/$SRCNAM-$VERSION.tar.gz +cd $SRCNAM-$VERSION +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ + -o -perm 511 \) -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + +./autogen.sh +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --docdir=/usr/doc/$PRGNAM-$VERSION \ + --build=$ARCH-slackware-linux + +make +make install DESTDIR=$PKG + +# Remove /etc/init but keep dbus config +rm -r $PKG/etc/init + +# Don't clobber configs +mv $PKG/etc/thermald/thermal-conf.xml $PKG/etc/thermald/thermal-conf.xml.new +mv $PKG/etc/thermald/thermal-cpu-cdev-order.xml $PKG/etc/thermald/thermal-cpu-cdev-order.xml.new + +find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +find $PKG/usr/man -type f -exec gzip -9 {} \; +for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a COPYING README.txt $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +cat $CWD/doinst.sh > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/system/thermald/thermald.info b/system/thermald/thermald.info new file mode 100644 index 0000000000..57c6ae3a61 --- /dev/null +++ b/system/thermald/thermald.info @@ -0,0 +1,10 @@ +PRGNAM="thermald" +VERSION="1.5.4" +HOMEPAGE="https://github.com/01org/thermal_daemon" +DOWNLOAD="https://github.com/01org/thermal_daemon/archive/v1.5.4/thermal_daemon-1.5.4.tar.gz" +MD5SUM="f7b63e691fb941c92e14ccfcb667b593" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +REQUIRES="" +MAINTAINER="Aaditya Bagga" +EMAIL="aaditya_gnulinux@zoho.com" -- cgit v1.2.3