libraries/atlas: Added (BLAS implementation)

1 files changed, 100 insertions, 0 deletions

diff --git a/libraries/atlas/README.SLACKWARE b/libraries/atlas/README.SLACKWARE
new file mode 100644
index 0000000000..3d7d9be243
--- /dev/null
+++ b/libraries/atlas/README.SLACKWARE
@@ -0,0 +1,100 @@
+ATLAS (Automatically Tuned Linear Algebra Software) is an  ongoing
+research effort focusing on applying empirical techniques in order to
+provide portable performance. At present, it provides C and Fortran77
+interfaces to a portably efficient BLAS implementation, as well as a few
+routines from LAPACK.
+
+IMPORTANT NOTES:
+
+1) Please note that the present SlackBuild for ATLAS does by no means
+   try to take into account all configuration/build issues of ATLAS.
+   Nevertheless, the relevant patches mentioned in the ATLAS Errata
+   are applied.
+
+2) The script takes advantage of the fact that the compilers shipped with
+   Slackware should be OK. It also assumes that you are installing on an x86
+   or x86_64 platform. If you decide to use other compilers or install on
+   another platform, you are unfortunately on your own and welcome to suggest
+   improvements or patches to this SlackBuild. Moreover, there is no "post
+   install" tuning performed.
+
+3) ATLAS does not conflict with the reference netlib BLAS (see also note 6).
+   Nevertheless, if ATLAS got installed successfully you should consider removing
+   netlib BLAS and (re)compiling every BLAS dependent package (starting with
+   LAPACK) against ATLAS. Otherwise you may not have much gain from installing
+   ATLAS and may even get into problems (see next note).
+
+4) There is a strong interaction between ATLAS and LAPACK. If you want to install
+   ATLAS just for testing and avoid problems with LAPACK you are urged to make
+   use of the SYS_DESTDIR variable as explained later. Otherwise consider the
+   following:
+   a) It is not recommended to install LAPACK just along ATLAS, i.e. without building
+      it against ATLAS. Moreover, if LAPACK is already installed you have to first
+      remove it and later on build it against ATLAS.
+   b) If ATLAS+LAPACK doesn't work for you, just stick with (netlib) BLAS+LAPACK.
+      Netlib BLAS is also available as a SlackBuild.
+   c) If ATLAS+LAPACK is installed you have to recompile and reinstall LAPACK after
+      each ATLAS upgrade.
+
+5) ATLAS conflicts with cblas.
+
+6) You have to have netlib BLAS installed before you install ATLAS. As stated
+   above, you should consider removing it from your system afterwards.
+
+INSTALLATION DETAILS:
+
+1) Make sure CPU throttling is off before starting the install. This is
+   important, since ATLAS has to tune itself.
+
+2) For the same reason, keep the load on the system as low as possible
+   while building ATLAS.
+
+3) There are a few extra variables which you may want or need
+   to give appropriate values when calling the atlas.SlackBuild:
+   MAX_MALLOC, REF_BLAS, USE_ARCH_DEFAULTS, SYS_DESTDIR and
+   DEFAULT_DOCS.
+
+   MAX_MALLOC is for adjusting the maximal size IN BYTES(!) that ATLAS
+   is allowed to allocate. According to the ATLAS errata, a too small
+   value may strongly reduce threaded performance. The default value
+   within this SlackBuild corresponds to 256MB. (The default value in
+   the ATLAS source corresponds to 64MB.)
+
+   REF_BLAS defaults to the full path to the netlib BLAS library as
+   installed from the appropriate SlackBuilds.org script. If you have
+   the netlib BLAS elsewhere, you have to set the appropriate
+   value to this variable.
+
+   USE_ARCH_DEFAULTS defaults to "yes", which means that the library
+   will be optimized by trying to take into account former builds done
+   on a similar machine. Thus ATLAS will use predefined optimizations
+   if available. This may reduce (much) the compilation time but may
+   not give you the best result if you don't use the same compiler
+   version (gcc 4.2) as the ATLAS author.
+   Please note that with this variable set to "no", or if there are no
+   known optimizations for your machine ATLAS compilation lasts for
+   about three hours! Take a nap :-)
+
+   SYS_DESTDIR is set by default to "/usr" and is the system destination
+   directory. When installing the package produced by this SlackBuild,
+   ATLAS's files will be written to $SYS_DESTDIR/include,
+   $SYS_DESTDIR/include/atlas and $SYS_DESTDIR/lib (or lib64).
+   Documentation files are written to /usr/doc/atlas-$VERSION if not
+   otherwise stated (see below).
+   You may want to change the value of SYS_DESTDIR to avoid conflicts (see
+   IMPORTANT NOTES above). IMPORTANT: SYS_DESTDIR has to have an absolute
+   path as value.
+
+   DEFAULT_DOCS has the default value "yes", which means that docs go
+   to /usr/doc/atlas-$VERSION, but you may want to let the docs to
+   go to $SYS_DESTDIR/doc/atlas-$VERSION. For this, just set this
+   variable to something like "no".
+
+   All these settings may be done the usual way on the command line when
+   calling this SlackBuild, you do not have to edit the script.
+
+If you also installed the LAPACK linked against ATLAS, consider the following:
+"IMPORTANT: If you are actually updating this library, i.e. ATLAS, you MUST also
+rebuild and reinstall LAPACK, even if there is no update available for LAPACK!
+Otherwise you end up with an broken/incomplete LAPACK library!
+